Call for mips testers D55xx/D57xx/D69xx
Re: Call for mips testers D55xx/D57xx/D69xx
You don't need to compile anything, every archive already contains binary in out- folder
I do NOT receive any PM. Please use forum.
Re: Call for mips testers D55xx/D57xx/D69xx
So yeah, i noticed this... All patches work, so nice job.I would want to make my own patch any resources forward this?
Re: Call for mips testers D55xx/D57xx/D69xx
No. You have sources as examples, you need IDA and decompiler to reverse your exeDSP, some toolchain and hundreds hours. Done.teodorgly wrote:any resources forward this?
I do NOT receive any PM. Please use forum.
Re: Call for mips testers D55xx/D57xx/D69xx
Hello!
I have dead UE40D5700 (mainboard paperlabel say UE40D5707 974B, MAIN 1018,1 SUB 1003.
I updated MAIN to 1027 bay USB method and after that remote control not working propely, I cannot stop TV any more by remote.
So I go to service menu and ofcource do many thinks not to allowed and after I start Micom upgrade prosess ( I see wait...) Nothing
happend long time and I have to disconnet power supply (230V). After that TV is totally dead. Red LED is not working when I put power
plug on.
PSU is OK, I disconnect cable from PSU to mainboard and backlight is OK, all voltage are OK. I read many many chains in this forum and
need help to unbrick my TV. I undestand that you are expert with that. I plan to buy following Arduido to chech and maybe unbrick my TV.
I need some detailed help, connection help an so on, pictures are wellcome, I am electrician but these elektronics is not so familiar for me.
http://www.ebay.com/itm/Ethernet-Shield ... 5d371d6fd7
I did not find any shematic for that TV, only PSU shematic founded from Elektrotanya. I do not so what is Micom eeprom but I thing is 8 pins
IC S24CSO near to Weltrend IC. Some picture follows.
Is it time waste to try to reset Micom eeprom or not, what is best plan to go to unbrick tv so I am pleased to in your test team after that.
I have dead UE40D5700 (mainboard paperlabel say UE40D5707 974B, MAIN 1018,1 SUB 1003.
I updated MAIN to 1027 bay USB method and after that remote control not working propely, I cannot stop TV any more by remote.
So I go to service menu and ofcource do many thinks not to allowed and after I start Micom upgrade prosess ( I see wait...) Nothing
happend long time and I have to disconnet power supply (230V). After that TV is totally dead. Red LED is not working when I put power
plug on.
PSU is OK, I disconnect cable from PSU to mainboard and backlight is OK, all voltage are OK. I read many many chains in this forum and
need help to unbrick my TV. I undestand that you are expert with that. I plan to buy following Arduido to chech and maybe unbrick my TV.
I need some detailed help, connection help an so on, pictures are wellcome, I am electrician but these elektronics is not so familiar for me.
http://www.ebay.com/itm/Ethernet-Shield ... 5d371d6fd7
I did not find any shematic for that TV, only PSU shematic founded from Elektrotanya. I do not so what is Micom eeprom but I thing is 8 pins
IC S24CSO near to Weltrend IC. Some picture follows.
Is it time waste to try to reset Micom eeprom or not, what is best plan to go to unbrick tv so I am pleased to in your test team after that.
You do not have the required permissions to view the files attached to this post.
Re: Call for mips testers D55xx/D57xx/D69xx
Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....
UE32F4510 T-MST12DEUC-1118.4 using donor root downgraded to 1112.2 + oscam
UE40D5700 T-MST5DEUC-1025.0 using public root RIP
UE40H6240 T-MST14DEUC 2130 using donor root + oscam
UE55J6240 T-HKMFDEUC-1470.3 no root
UE40D5700 T-MST5DEUC-1025.0 using public root RIP
UE40H6240 T-MST14DEUC 2130 using donor root + oscam
UE55J6240 T-HKMFDEUC-1470.3 no root
Re: Call for mips testers D55xx/D57xx/D69xx
Good, very good Did you try MIPS patches from public forum ?steef84 wrote:Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: Call for mips testers D55xx/D57xx/D69xx
i also have MST.., i can help if you want me..
My TV: 37UED5700, with firmware T-MST5DEUC-1009.1
My TV: 37UED5700, with firmware T-MST5DEUC-1009.1
Re: Call for mips testers D55xx/D57xx/D69xx
Yeah welcome Did you try already released patches ? Please also check ARM D patches if you want some I can port to MST/MIPSmark21 wrote:i also have MST.., i can help if you want me..
My TV: 37UED5700, with firmware T-MST5DEUC-1009.1
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Re: Call for mips testers D55xx/D57xx/D69xx
Hi,
i have a UE46D5700. Requires you still Tester ?
BG
Basti
i have a UE46D5700. Requires you still Tester ?
BG
Basti
Samsung UE46D5700
Re: Call for mips testers D55xx/D57xx/D69xx
Of course MST testers are ALWAYS welcomed Did you try patches that we already released in D MIPS section ? That's first thing worth checking. Next check D ARM. Thanks to previous work it is now possible to port (almost) ANY D ARM patch to D MIPS. We just need your feedback what you want ?bdwbasti wrote:Hi,
i have a UE46D5700. Requires you still Tester ?
BG
Basti
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!