im really no expert on this field but here is basically what you need to do:
https://forum.samygo.tv/viewtopic.php?f ... 468#p97468
find required pins hook up some box like Z3x EasyJtag, atf box, medusa, dump mtd_rwcommon part, mount dump and remove file, flash back modfied dump. dont touch any other partition though:)
anyways just came to my mind, maybe sectroyer has some browser/flash based exploit which he can modify to remove that file
Update.disable again...
Re: Update.disable again...
sorry, i cant fix stupid
oscam E/F, PVR encryption key dumper E/F, PVRtoTS E/F, PVRAnyDev E/F, SamyGOso .so injection, STFU mod D/E/F + other stuff
oscam E/F, PVR encryption key dumper E/F, PVRtoTS E/F, PVRAnyDev E/F, SamyGOso .so injection, STFU mod D/E/F + other stuff
Re: Update.disable again...
Well, for the price of hardware needed to dump, you can buy 2 mainboards
I do NOT receive any PM. Please use forum.
Re: Update.disable again...
Looks quite idiotically: deleting a file by replacing mainboard. Hard to believe that they are not left some loophole for their service engineers.
Alexander
Re: Update.disable again...
Did you try Smarthub region change trick?
I do NOT receive any PM. Please use forum.
Re: Update.disable again...
No trick there, unfortunately. Has changed to USA, has changed back, reset Smart Hub did, the behavior is identical.
You do not have the required permissions to view the files attached to this post.
Alexander
Re: Update.disable again...
1. Attach to fat32 formatted USB CreateDeleteUD directory (unzip widget downloaded from link below)
2. Start smarthub and find widget. If widget is not there, remove USB, power off TV, then attach USB and power on TV.
3. Execute CreateDeleteUD
4. Press red RC button and hold it until you get OK on the screen.
5. Unplug TV from electricity (from wall) and wait until led is no more blinking. Remove USB with widget.
6. Powe on TV
7. Reset smarthub
Inform us about result.
p.s. link to widget here: https://www.sendspace.com/file/t16m34 , you can check js...
p.p.s. original info here.
2. Start smarthub and find widget. If widget is not there, remove USB, power off TV, then attach USB and power on TV.
3. Execute CreateDeleteUD
4. Press red RC button and hold it until you get OK on the screen.
5. Unplug TV from electricity (from wall) and wait until led is no more blinking. Remove USB with widget.
6. Powe on TV
7. Reset smarthub
Inform us about result.
p.s. link to widget here: https://www.sendspace.com/file/t16m34 , you can check js...
SpoilerShow
Code: Select all
case tvKey.KEY_RED:
Param="FilePlugin.Delete (InstPath + '/update.disable')";
r = eval(Param);
if (r==1) str = '<b style=\'color:green\'>[OK]</b>'; else str = '<b style=\'color:red\'>[NO]</b>';
Log("Deleting file " + InstPath + "/update.disable: " + str);
break;
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Update.disable again...
What you write is shown in Figure 3 (Attempting to install from flashdrive). Again, widgets do not start nor USB nowhere. This not suitable solution for "H". But basically bugficks has explained, what I should do. Special thanks to him for that.
Alexander
Re: Update.disable again...
Have you tried cold start (USB is attached after TV is unplugged from wall) or only hot start? Or both? And no, according info, info is suitable for H series as well.
LE40B653T5W,UE40D6750,UE65Q8C
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Have questions? Read SamyGO Wiki, Search on forum first!
FFB (v0.8), FFB for CI+ . Get root on: C series, D series, E series, F series, H series. rooting K series, exeDSP/exeTV patches[C/D/E/F/H]
DO NOT EVER INSTALL FIRMWARE UPGRADE
Re: Update.disable again...
I'll continue.
Below log's fragment of attempt to start a widget. It is interesting that "App sync is not completed". I.e. it believes that the sync has not been completed (and this is its permanent state). I don't know, it's because - H-series, or it's because T-GFPDEUC. Cold start, whether warm... That is.
Thought. There is an interesting menu in TDM (11-1-2)- GPIO interface. Whether it is possible somehow to use this?
Below log's fragment of attempt to start a widget. It is interesting that "App sync is not completed". I.e. it believes that the sync has not been completed (and this is its permanent state). I don't know, it's because - H-series, or it's because T-GFPDEUC. Cold start, whether warm... That is.
Code: Select all
[AP_AppsHome/Fatal] 3827 : * widget id : CreateDeleteUD
[AP_AppsHome/Fatal] 3828 : AppsUtil::IsWidgetReady()
[WidgetService/Fatal] 3829 : CWSAccountManager::GetAppsInitialStatus() App sync is not completed. return false.
[AP_AppsHome/Fatal] 3830 : AppsUtil::IsWidgetReady() GetAppsInitialStatus == false, state value = [-2]
[AP_AppsHome/Fatal] 3831 : [ENTRY-GUI] : AppIsNotReadyState
Code: Select all
==============================
[ GPIO Debug Menu ]
------------------------------
0x01 : Create
0x02 : Destroy
0x03 : FlagCreate
0x04 : Read
0x05 : Write
0x06 : GetDirection
0x07 : SetDirection
------------------------------
0x99 : Exit Debug
------------------------------
6
Port Number <<: 0
>>[ERR:TDcSamGpio.cpp] Read():160 Not Create...
Alexander