[SOLVED] Downgrade GAS6DEUC to 1014

[juusso]

You just need reboot TV and those cached files gone.

[johnhawk]

Yes, I have rebooted for several times, but I have not unplugged the power cord. Is it necessary to wait 1-2 min. between switching off and on? I did not.
I will try again tomorrow, or sunday. If I got news, I will report.

[johnhawk]

Hi,
today I tried it again. Both times, it stops at 90%. No success! It seems to be a problem with the Firmware on the server. Could you pls. change the FW to a working Version. After you set the UE32D6300 on the SamyGO-Blacklist, I have no possibility to get access via ftp. I need it for changing the data in netstream iptv files.

[arris69]

Hi,
today I tried it again. Both times, it stops at 90%. No success! It seems to be a problem with the Firmware on the server. Could you pls. change the FW to a working Version.

with the firmware is nothing wrong, i raised version number so check again pls. if it won't work then we need second tester with GAS6 based firmware...

After you set the UE32D6300 on the SamyGO-Blacklist,

there is no blacklist anyware, you tv not submit information about model type thats why you get brokentv widget, what's absolute correct behavior.

I have no possibility to get access via ftp. I need it for changing the data in netstream iptv files.

[arris69]

@johnhawk
once again pls. looks like tv don't like the submitted mime type for the kernel...

thnx
arris

[johnhawk]

2 minutes ago, I made a Factory-Reset and tried, with a New-TV-setup, again a FW-Update from your server. I've seen, that you raised the Version-No. to 001091, but again no success. Maybe there could be something wrong with the FW on my TV? What if I would update to the next FW and try then again an update from your Server. What is the next Version after 1015.2? Updating is always a bad option, right? I think, it's impossible to reload the existing FW 1015.2 again to TV, right?
I got the Errorcode: 800 (Downloadfehler Fehlercode: 800 (Resourcenfehler)). Could you give me a Downloadlink for this FW pls.? So I could update via USB.
What does it mean with "submitted mime type for the kernel"?

[arris69]

2 minutes ago, I made a Factory-Reset and tried, with a New-TV-setup, again a FW-Update from your server. I've seen, that you raised the Version-No. to 001091, but again no success. Maybe there could be something wrong with the FW on my TV?

it's more network releated troubles, you tv is connected over router to internet? can you try to connect tv direct to internet?

What if I would update to the next FW and try then again an update from your Server.

you can try it, then we will see

What is the next Version after 1015.2?

duno, you can check it on samsungs homepage

Updating is always a bad option, right?

mostly

I think, it's impossible to reload the existing FW 1015.2 again to TV, right?

yes

I got the Errorcode: 800 (Downloadfehler Fehlercode: 800 (Resourcenfehler)).

yes, here are no really usefull error messages/handling on tv.

Could you give me a Downloadlink for this FW pls.? So I could update via USB.

you can't install this firmware over usb

What does it mean with "submitted mime type for the kernel"?

not so important, you can't change it.

[johnhawk]

Yes, the TV is connected over router to internet. Normally, it was connected through (devolo) powerline to the router. That worked pretty good. Today, I connected the TV over LAN-cable to the Router. Router is a Fritz!Box 7390 connected over VDSL to internet. ISP is t-online. Over this router it is connected direct to the internet. I can try to disable ipv6? Or what else can I do?

[arris69]

Yes, the TV is connected over router to internet. Normally, it was connected through (devolo) powerline to the router. That worked pretty good. Today, I connected the TV over LAN-cable to the Router. Router is a Fritz!Box 7390 connected over VDSL to internet. ISP is t-online. Over this router it is connected direct to the internet. I can try to disable ipv6? Or what else can I do?

first better to wait for a second tester to see he get exact same error or smthg. other.

[johnhawk]

Heeeeyyy second Teeeesteeer, come over heeere and Teeeeest
Correct, I will wait a day or two (or three, or 4). There are so many other things to do.
I'll come back later and ... test, test, test.

Sry., I had a couple of glasses of a pretty good spanish red Wine and with the next bottle, I'm shure, I will fly... bye-bye.