[How-To] Rollback on old FW...

[edelfalke]

you have to encode your "exe.img.enc and appdata.img.enc" images with xor! as described here http://wiki.samygo.tv/index.php?title=S ... re_Patcher

[edelfalke]

So you have now .img Files not .img.anc ?
Then is my Failure.

You have to adapt all following Lines:

in Step 4+7+8:
/dev/bml0/8 to /dev/bml0/10

in Step 10:
/dev/bml0/9 to /dev/bml0/11

in Step 11:
/dev/tbml8 to /dev/tbml10
/dev/tbml9 to /dev/tbml11

Screen reverts every time if you run /mtd_exe/rc.local.

[edelfalke]

Correct, i meant /dev/tbml8 to /dev/tbml10, thanks.
Don't forget to do a backup of your /dev/bml0/10 and /dev/bml0/11 before you begin to flash.

[juusso]

lol now i'm afraid....
if i eraze and restore /dev/bml0/8 and 9
what did i actualy eraze ?!?

Don`t worry, I did the same mistake, i did erase and restore 8. and 9. partitions And nothing happends!
After this i investigated, that my partitions are others as in example. Is ok, there aren`t any 8 and 9 partitions in my and your TV mounted and erasing them can`t kill your TV. Just make all steps with right numbers (10 and 11) and everything will be OK. Use exe.img and appdata.img instead *.enc! Have luck!
After succesfull rollback, you will still dont have telnet autostart, you have to create the script file /mtd_rwarea/samygo.sh like shown here: http://wiki.samygo.tv/index.php?title=H ... rt_Scripts . Patched firmware doesnt have autostart scripts. It can execute samygo.sh if it is in /mtd_rwarea/.