Page 2 of 5
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Mon Feb 18, 2013 9:08 am
by DEUS
OK just try to use the NFS Recording Page to setup the rest of your stuff. I did that a little bit different (see brainstorm). you need a PVRImage file set up in 04_04.vusb.init.remi71 and this needs to be mounted correctly and some content in the image. or a usb partition with the .PlaceHolderDO-NOT-REMOVE file should work too. but this is just from a quick look over the file.
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Mon Feb 18, 2013 11:38 pm
by brunogts77
Hi deus but this works for samba?
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Tue Feb 19, 2013 9:21 am
by DEUS
it should work as far as i remeber, the difference is just the 80_80 for the SMB share the rest is the same as NFS, NFS is prefered because of performance and so on.
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Tue Feb 19, 2013 9:35 pm
by brunogts77
I'm a little confused ... In Brainstorm says so much that I do not know what to do?
Re: AW: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Tue Feb 19, 2013 11:01 pm
by DEUS
Ok then let me ask, do you want to use a USB drive connected to your TV, for pvr you need one, you should have a xfs partition on it with 1,5 gb storage. Then the placeholder file needs to be on that partition.
The brainstorm part is only tested on arm but might work on mstar to, no USB required because uses vusb but some storage on mtd_down
Re: AW: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Tue Feb 19, 2013 11:46 pm
by brunogts77
DEUS wrote:Ok then let me ask, do you want to use a USB drive connected to your TV, for pvr you need one, you should have a xfs partition on it with 1,5 gb storage. Then the placeholder file needs to be on that partition.
The brainstorm part is only tested on arm but might work on mstar to, no USB required because uses vusb but some storage on mtd_down
Good evening. I wish I could record without using usb. What should I do?
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Fri Feb 22, 2013 3:52 pm
by brunogts77
The brainstorm part is only tested on arm but might work on mstar to, no USB required because uses vusb but some storage on mtd_down
What do you mean by "but some storage on mtd_down"????
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Sat Feb 23, 2013 8:04 pm
by DEUS
arround 20MB for a xfs partition image when you mount it via Vusb it will be an 1,5GB partiiton it is everything described there
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Sun Feb 24, 2013 1:58 am
by brunogts77
DEUS wrote:arround 20MB for a xfs partition image when you mount it via Vusb it will be an 1,5GB partiiton it is everything described there
But I need to modify VUSB? How do I increase this space?(20MB)
Re: HELP-PVR Recording over Samba for D-Series MSTAR
Posted: Sun Feb 24, 2013 4:11 pm
by brunogts77
When I run 02_04_vusb.vpvrimage.init, VUSB disappears. When I run manually vusbpvrimage in web-cgi the message appears:
Code: Select all
cat: can't open '/sys/block/sd?/device/model': No such file or directory