SamyGO

Hi there,

I have found theese ports open (although not even one TCP, only UDP ones):

PORT STATE SERVICE VERSION
500/udp open|filtered isakmp
996/udp open|filtered vsinet
2345/udp open|filtered unknown
17490/udp open|filtered unknown
17494/udp open|filtered unknown
19197/udp open|filtered unknown
19294/udp open|filtered unknown
20423/udp open|filtered unknown
24511/udp open|filtered unknown
42577/udp open|filtered unknown

Are they anyhow usable?
ruSamsungCommunicator couldn't establish connection.
The tv set is in hospitality mode now.

Thanks.

fcela wrote: I would like to avoid risk flashing 3D FHD fw to non 3D HD device. When switching to debug log, I can see error when detecting Display (2d/3d 60Hz vs 120Hz) when on orig fw and model changed to 6030.
What is the difference between NOVATEK 4 and NOVATEK 5 series chip (fw T-NVTE4DEUC_1008.0_SAMSUNG4003 vs T-NVTE5DEUC_1012.0_SAMSUNG6030)? Is it ARM family or anything else? I couldn't find any useful info on novatek homepage: http://www.novatek.com.tw.

T-NVTE4DEUC firmwares come with 2012y 4th series models (e.g. yours)
T-NVTE5DEUC firmwares come with 2012y 6th series models (e.g. EH603X), crippled ones( just 200Hz MR, only one USB port), compared to same series based on T-MST10PDEUC.
Some interesting info, which could explane your question.

hristoslav2 wrote: The difference in price is determined by different chassis, panel and processor.

Model - Firmware - processors
E420 -> E450 -> T-MST9DEUC-1002.0 X9 -> MStar X9 600Mhz
EH4003 -> EH6003 -> T-NVTE4DEUC-10xx.x -> Novatek
EH4000 -> ??5000 -> T-MST9DEUC-1002.0 X9 -> MStar X9 600Mhz
EH5300 -> ??5450 -> T-MST10PDEUC-1005.2 X10 -> MStar X10 900Mhz
ES5500 -> ?S6800 -> T-MST10PDEUC-1005.2 X10 -> MStar X10 900Mhz
ES7000, ?S7500, ES8000 -> T-ECPDEUC-0145.6 -> Echo-P CPU-Dual-core ARM Cortex-A9 1Ghz GPU-Mali-400 MP4
ES6900, ?S7100, ?S7200 -> T-MST10PDEUC-1005.2 X10 -> MStar X10 900Mhz

We don`t have firmware decryption keys for this firmware neither ways to root. If it is possible to do firmware upgrade online, you could try to enter SamyGO DNS, make cold TV start and try to search for firmware online. We collect some info about TV, addresses and so on. Post PM your IP you`re connecting from. Thanks!

About risk flashing different firmwares: 200% brick. You can try just only if you`re sure they`re cross-compatible, have same partition structure, sizes and so on. And just only if you have root access...

I suggest you also to search code for top debug menu trough exlink cable. Perhaps here is unlimited shell left on device?

Hi,

I will check my external IP when at home...
Ex-link is working, but console still locked... I think i've tried all of the known unlock codes (if someone could update wiki?).
Is there any reason why the model 6030 is available through menu settings and not any other 6-series model?

Thanks.

I think only reason is same firmware family and/or hardware base. Duno ...
No code updates on wiki since few months. If we could get online firmware, then perhaps keys could be found too..

here is no firmware online for your model. moreover Samsung wont eecognize it identifcators at all. No luck.

Hi there,

so the solution could be if someone with the simiral model (supported one, EH6030 for ex.) try to upgrade through your DNS?

Thanks.

Yes, it could be the solution

I've sent some requests to avsforum's members.
Let's hope someone will be helpful.

Hi everyone,

it seems, the code for DLNA streaming is missing in the firmware package (T-NVTE4DEUC).
When I switched to 6030 model (the T-NVTE5DEUC firmware is suitable for the model), "ALL Share" icon appears in the Media menu (CONTENT button on the remote), but TV immidiatelly restarted when activating it. I had to enable "All share -> ON " in SM as well. If the screen is mirrored, you can set "HV Flip" SM item to correct his.
I think there has to be left some functionality in the "System -> Settings" menu item that will set parameters depending on the model in the SM.
Activating this menu item (and folowing the wizard) can brick your tv set, when the model type in SM was set incorrectly.

Anyway, virtual USB mount should be enough for media streaming from NAS, because Network is available through external wifi adapter.

Any hints how to move forward with the issue (network streaming)?
Copying the content to USB is really annoying.

Thanks.

I also have this TV (North American model: UN32EH4003F) and am looking forward to see what other features I can get out of it

I'm new to the forums and I'm not sure if this has been posted yet, but here is the link to the latest firmware (1008).

http://downloadcenter.samsung.com/conte ... 1008.0.exe

and a mirror in case the file disappears: http://ubuntuone.com/2xQESKb2tazpWa3Bek1Ms5

MD5 sum: 8487029c80cf85be6c5b3d1458bda547
SHA1 sum: 9658fb329e1a7ac8e86b897a7b0c36f25c0e9581