SamyGO

Hey don't think I know more than you do

Im also new on this and try to get the best out of my UE40ES7000

Anyway - thanks for your answer!

I'm still afraid to do the change I'm not sure... but first time I brick my TV I change something in TV Model but don't know what exactly anymore LoL

Found my Balls again and gave this a try

Changed my UE40ES7000 in Service Menu (with Service Control) to UE40ES8000 without any Problems.... Done a factory reset (in Service Menu) after that...

Improvements? Changes? Don't know... Will report if I find some... But I don't think so

Thanks again to vanisz who answered my question steadily...

OLD:
Panel: 40A2UF1E
Basic Model: UES7000
SVC Model: 7000

NEW
Panel: 40A2UF1E
Basic Model: UES8000 (2x Right on Control for 7000 to 8000)
SVC Model: 8000 (changed automaticly)

Hey guys,

When I enter the service menu I see that Basic Model and SVC Model are greyed out and I can't change them.
How do I get the service control you're talking about?

Thanks in advance

DevilDante24 wrote:Hey guys,
When I enter the service menu I see that Basic Model and SVC Model are greyed out and I can't change them.
How do I get the service control you're talking about?
Thanks in advance

I know two ways:
Build your own IR Transmitter
http://wiki.samygo.tv/index.php5/Remote ... ransmitter

Or buy an Service Control (not original Samsung) - This is a link to German Ebay - He'll ship to EU - Watch your TV Model!!!
http://www.ebay.de/sch/i.html?_trksid=p ... &_from=R40

I heard from a guy how build his own Service Control but I Don't know where I found this...

I bought this control before I read about the IR Transmitter possibility - I would give it a try...

40 euro?? you guys are crasy if you spend such money for tool which you will never use in future. Better buy someething for your sweet ppeople or yourself but don't spend it for service remote. Sure it is up to you, but...

IR transmitter cost is few euro max: three dyi parts: two IR diode and one 3.5 male stereo jack. plus few minutes soldering without soldering skills.

To enter service mode i used irRemote (Psiloc irRemote) application on nokia e51 that turns mobile phone into ir remote controler. In that application You will have Samsung service remote template.

So it costs me notng.....except time.


Regards

juuso wrote:40 euro?? you guys are crasy if you spend such money for tool which you will never use in future. Better buy someething for your sweet ppeople or yourself but don't spend it for service remote. Sure it is up to you, but...

IR transmitter cost is few euro max: three dyi parts: two IR diode and one 3.5 male stereo jack. plus few minutes soldering without soldering skills.

Yes - I know it - now As I bought my TV I didn't even know that SamyGo (and its nice Wiki) exists! Found this Service Control and bought it without thinking However!

Now I would prefer (of couses) the self made solution via IR Transmitter...

@vanisz

Hey Vanisz.. I recently wanted to try the internal Camera with the Samsung Camera App but it seams that it is not working propperly!

If I start the app it didn't show the Live-picture... Furthermore its not possible to shot photos (TV hangs and only EXIT button is possible).... Videorecoring works but also only in "blind-mode" without showing the live-view again...

Camera-Hardware should be OK because gesture control and its calibration works (also with its live-view)

Is your Camera App working after changing to ES8000 ?

EDIT - looks like SamyGo issue - Not an issue of "Change to 8000"

Moved here: viewtopic.php?f=53&t=5797&p=42170#p42170

Hi,

My Samsung Camera App works without any problems. I have life view, and posibility to take a photos.
Firmware: T-ECPDEUC-2004.1, BT - S/I/G

Informations about "Camera" from smart hub:
Size: 10.3 MB
Version: 9.93011

Regards.

vanisz wrote:My Samsung Camera App works without any problems.

First of all thanks for this details information....

Do you have SamyGo installed?