Page 2 of 3
Re: HELP
Posted: Sat Sep 21, 2013 10:46 am
by juusso
Re: HELP "Weak or No Signal"!
Posted: Sat Sep 21, 2013 12:29 pm
by mattberlin
Hi juuso
The output is:
/dev/st10/14 on /mtd_rwarea type rfs (rw)
Should I substitute the bm10 with st10?
Re: HELP "Weak or No Signal"!
Posted: Sat Sep 21, 2013 12:37 pm
by juusso
copy paste my commands! it is not st10, but stl0!!! You do typo mistake. stl means STL
Re: HELP "Weak or No Signal"!
Posted: Sat Sep 21, 2013 7:00 pm
by mattberlin
Thx! Sorry for my analphabetic moments
When executing the 3rd operation you provided me with - I'm getting the message shown in the attachment. This seems to be odd to me.
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 10:51 am
by juusso
weird. Possible - this error is mirror of your other problems.
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 10:58 am
by juusso
do you write /dev/BML0/14 OR /dev/bm10/14 ???
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 11:08 am
by mattberlin
I wrote bml (BML) and not bm1
What should I do now?
In addition SamyGO.sh is not executed anymore upon TV start up. Also inectso doesn't work anymore. Do you have any idea how to fix this?
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 11:15 am
by juusso
its because your mtd_rwarea is damaged. Hard to troubleshoot... can you organize telnet/ssh access for me? redirect your routers 23 port to tv`s IP:23 port. I could check it.
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 12:10 pm
by juusso
ok, don`t poweroff tv, i`m connected.
Re: HELP "Weak or No Signal"!
Posted: Sun Sep 22, 2013 12:12 pm
by mattberlin
ok!