SamyGO

Posted: **Sun Nov 22, 2009 5:57 pm**

shwed wrote:I try interrupt the boot process.
...

Do you have Any ideas(combinations)??

without ex-link, no.

its not too hard to make it, need an old stereo headphone and serial/ps2 (or serial/usb) adapter + stuff for soldering.
but it is simpler to by the connectors and cable.

hth
arris

ps: can you send me pls your selfmade boot.img for analyse, whats going wrong and from where you had the modules and squashfs tools.
mailto:arris@gmx.net

Posted: **Sun Nov 22, 2009 7:58 pm**

shwed wrote:Arris, i send you mail with boot.img.
Can you draw schematic of cable. (if i have 3,5 jack and USB)

I can send you my Wi-FI ids patcher. (i replace 4 byte in rt73.ko and original rt73.ko begin support ASUS WL-167G)

http://linux.zsolttech.com/Samsung/Deve ... exlink.gif

to your modules rt73.ko looks ok but your cifs.ko is very big.
you made also squashfs 3.1 and not squashfs 3.0 image

think i saw in kernelsources kernel support for 3.1 squashfs, but didn't tested it.
i am not shure

filesystem too big?
squashfs wrong version
rc.local wrong?

than if you can replace your boot.img from u-boot and get your tv working again we can safe test whats realy goes wrong.

arris

Posted: **Sun Nov 22, 2009 9:26 pm**

shwed wrote:I try interrupt the boot process.
I try:
- hold ENTER(when TV start)
- hold Volume + (when TV start)
- hold Exit 10Sec (when TV start)

no results.....

Do you have Any ideas(combinations)??

I assume you did not read the Thread that I included in my earlier posting, otherwise you would know what key you need to press to interrupt the boot process and wouldn't be asking this question ?

Regards
dynamic

Posted: **Sun Nov 22, 2009 11:16 pm**

You need to send the tilde ( ~ ) character via serial console to interrupt the boot process.
I suggest you check out this this posting.

Regards
dynamic

Posted: **Mon Nov 23, 2009 9:12 am**

shwed wrote:Why rc.local wrong?

hi,
you have

Code: Select all

chown -R root:root dev_bml0_07

in your rc.local, this will for shure fail and can stop the boot process
in rc.local you should have things like

Code: Select all

insmod /mtd_boot/modules/cifs.ko

arris

SamyGO

Modify squashfs images (boot.img/rootfs.img)

Re: Modify squashfs images (boot.img/rootfs.img)

Re: Modify squashfs images (boot.img/rootfs.img)

Re: Modify squashfs images (boot.img/rootfs.img)

Re: Modify squashfs images (boot.img/rootfs.img)

Re: Modify squashfs images (boot.img/rootfs.img)