40B6000

[e3xtreme]

hmmm it seems that Ctrl+C caused the freezing, so use 1198282 -> 11 -> 04 -> 68 to access shell

[juusso]

Ctrl + c always kills exeDSP and that causes freezing

[e3xtreme]

as you told me ^^, now I will go for the faulty boot.img,...
I will use the TUT http://wiki.samygo.tv/index.php5/Dumpin ... es_by_hand...
to flash the boot.img. It's the (dev_bml0_07.img) file from

Code: Select all

cat /dev/bml0/7 > /dtv/usb/sda1/dev_bml0_07.img

from the NETWORK enable TUT http://wiki.samygo.tv/index.php5/Enable ... es_Devices...

and you are right I use too much TUTs

[e3xtreme]

OK now I managed to get my old boot.img on the TV -> SamyGO.sh is executed only once, but TV pretends that it is not found (I gave it 755 rights)

Code: Select all

Application is started..
/mtd/rc.local: /mtd_exe/rc.local: 10: /mtd_rwarea/SamyGO.sh: not found

same problem like before... but it starts SamyGO.sh on start so no need to worry...
but when executing rcSGO from /mtd_rwarea with plugged in SamyGO USB Stick everything is mounted like it should.... ..... I made a little dance around the TV .....

So for now the next step is getting the SamyGO.sh script loaded on boot without USB Stick needed, then we would have reached all goals

1. So where can I put the SamyGO folder? /mtd_contents/ would be best, wouldn't it?

Thanks to juuso and erdem_ua for my now working shares