[ROOT] "Skype replacement" root E/F

[lilo40]

Hello
TV Samsung ps64e8000 have uploaded 0000 firmware , then T-ECPDEUC_2009.2 firmware . I did restart TV and SmartHub .
After downloading the Install SamyGo image 1.1.E and file and data / 128mb.xfs TV shows error Step 6 ( Samy Go image) NO
What am I doing wrong? Help mi

[oldman]

Guys, has anyone tried to use the STOP_SAMYGO file for avoid run this FW? After turn the TV on SamyGO is loaded although the USB FlashDisk (FAT-32) with STOP_SAMYGO file is plugged.

[zoelechat]

Guys, has anyone tried to use the STOP_SAMYGO file for avoid run this FW? After turn the TV on SamyGO is loaded although the USB FlashDisk (FAT-32) with STOP_SAMYGO file is plugged.

STOP_SAMYGO check is there. Usually happens when USB device is "not fast enough" to be detected by TV before root starts.

[oldman]

With the same flashdisk (Flash Voyager 8GB) I was able use the STOP_SAMYGO for SamyGO version with Skype app. It is strange... Ok, I have to try another flashdisk.

[zoelechat]

Funny indeed, but had been observed while testing, randomly at first sight but then we noticed it never occured anymore if some sleep was added before STOP_SAMYGO check. So we concluded it happened when USB wasn't reachable at that point

Seems to be timing issue. Added "sleep 5" to first (new) stop script and it works also on TV start. Looks like my DualCore is too fast at this point

STOP_SAMYGO will only work when usb drivers are loaded and usb is detected. This happens sometimes in not very early boot stage and some delay is required. Bad that this delay can be different from tv to tv.

...and surely even more from USB to USB

That root is slightly faster to start than "original Skype" one, could explain...

[oldman]

funny, really... I have not found any other flashdisk at this moment I need to buy a new one. I wanted to try to stop samyGo because I have strange behavior with the functionality of the CEC on my Raspberry PI3 with this fw. It could wait. Thanks.

[phdez29]

Hi... how can i access to filemanager using FTP or Telnet?

I installed SamyGO using this metod...

My firmware is T-MST12AKUC-2210.1 and my TV is UN32F5500AF

[phdez29]

Hi... how can i access to filemanager using FTP or Telnet?

I installed SamyGO using this metod...

My firmware is T-MST12AKUC-2210.1 and my TV is UN32F5500AF

PD: When I trying to connect using Telnet, FTP or ssh, I get the next message:

ssh: connect to host 192.168.0.13 port 22: connection refused
*I use Terminal on Ubuntu (Latest version)

FTP: You can not establish a connection because the target machine expressly denied such a connection.
Connection error .
* I try using WinSCP and Filezilla.

Telnet: Network error: Connection refused.
*I use PuTTY

* I try to access using root user, and in password i don't put nothing.

[mihd]

* I try to access using root user, and in password i don't put nothing.

Try password "SamyGO"

[zoelechat]

The problem is only fw version, much too recent. Would need something like <1120.