Page 11 of 18
Re: Rollback on old FW...
Posted: Sun May 02, 2010 12:05 pm
by ji035453
valdice wrote:Hi there, i follow all guide of pite to enable telnet with game trick, and all is done fine i think.
I have 46B750 with 3000.2, and i put with your guide 2000.5 on partition 11 and 12
After screen of tv side up and i restart i can see in software upgrade menu again 3000.2 firmware version.
What's wrong?
I must advise in last step
when the tv screen side up many many errors in putty console.
Thx in advice
Did you read this thread till the end including my investigation? You can try this:
http://forum.samygo.tv/viewtopic.php?f= ... t=60#p4929
http://wiki.samygo.tv/index.php?title=F ... r_firmware
But please, check that you previous firmware in partitions /dev/tbml8 and /dev/tbml9 is intact.
Re: Rollback on old FW...
Posted: Sun May 02, 2010 2:23 pm
by ji035453
valdice wrote:i begin to study your research now, just i want to inform u that first of doing the procedure on partition 10 and 11 i dont see them on df -h and i do all procedure on 8 and 9, i must restore original images on 8 and 9 first of all?
Oh, so you haven't your previous firmware in partitions /dev/tbml8 and /dev/tbml9 intact now, right? It's a pity for you. If you have backup of it then yes, you must restore it first.
valdice wrote:just i want to inform u that first of doing the procedure on partition 10 and 11 i dont see them on df -h
What do you mean exactly by this?
Without these commands, you cannot see those restored partitions with df -h:
Code: Select all
mount -t auto /dev/tbml10 /mtd_exe
mount -t auto /dev/tbml11 /mtd_appdata
Sorry for my question, but do you know what are you doing, or do you just repeat the whole procedure mechanically?
Re: Rollback on old FW...
Posted: Sun May 02, 2010 3:59 pm
by ji035453
valdice wrote:And yes i'm repeating mechanically some parts of guides, cuz i'm not expert of all of this
So please, look very carefully before you leap.
Re: Rollback on old FW...
Posted: Sun May 02, 2010 5:20 pm
by ji035453
valdice wrote:Did I understand everything correctly?
This is much better, Exactly
.
Please, but check with diff, that your backup of /dev/tbml8 and /dev/tbml9 really contains fw version 2000.5.
At least backup of /dev/tbml8 must contain string "T-CHL7DEUC-2005.0".
PS: What is your native language?
Re: Rollback on old FW...
Posted: Sun May 02, 2010 6:56 pm
by erdem_ua
valdice wrote:With a hex editor I verified that our old image was version 1004.
Admin spams here
I rule that Official hex editor of SamyGO is
wxHexEditor!. Other hex editors will not supported by me
I updated GUI today if you compile from use svn-trunk can split tabs for multiple view.
