SamyGO

kaydee wrote:With me telnet to open lasts almost 3 minutes, is that normal?

Perfect At least 2 minutes

can I speed it up? start faster?

kaydee wrote:can I speed it up? start faster?

Why faster? You can make it slower Unless you are willing to break your TV ? Then it can bootloop VERY FAST

UE40H6410 FW 2740

I think its work ,no ask for reboot on my screen

8:The widget will automatically finish installation (No need to push any buttons).
9:When it finishes it will ask to reboot TV.

OTN and Watchdog iss off

idladues wrote:I think its work

Best way to know is to check FTP/Telnet.

idladues wrote:no ask for reboot on my screen

It asks but just out of screen, you'd have seen it if you had pressed down arrow

I see ftp:
[R] Verbunden mit 192.168.178.79
[R] /bin/sh: can't access tty; job control turned off

the files are not complete?!?!? When i start the "patch.bat" the "cmd" search the vermagic.txt but the LED on USB blinks short,then nothing happend.

idladues wrote: I see ftp:
[R] Verbunden mit 192.168.178.79
[R] /bin/sh: can't access tty; job control turned off

Check FTP on port 21 and Telnet on port 23. Here you say "FTP" and you give Telnet (probably on port 3123) output.

No need to read between lines and ask yourself the wrong questions, just apply procedure

Hello sectroyer , is it possible that there are diffrent Wlan modules in the tv?s , i mean specialy the hu 8500 ore hu 8590 models like bobsilvios and mine, we have the insmode_bcm.sh on usb stick when we tryed to root .I opened the file with editor and believe this is Broadcom .The rooting files allways shows insmod_qca.sh , it seems like Atheros drivers, so pls can you change the rooting files for us and other users with this problem?
bluescreen60

H6400 @ MST-2135.4. OTN support and watchdog off.

Hmm, things didn't go as planned. FTP is fine, no Telnet or SSH.




My wifi connection is 5 GHz.

Can I just have another go or do I first have to get rid of some thing or reset anything?

Also mentioned before, these settings are not present in my firmware version.
- Menu->System->General->Quickly Power OFF Samsung - this option must be OFF
- Menu->System->General->Samsung Instant ON - this option must be OFF

4tune wrote:

Code: Select all

bin/sh: can't access tty; job control turned off

This "error" definitely doesn't mean root failed, it's even EXPECTED on port 3123 and means you HAVE telnet access