Page 103 of 113
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Tue Apr 26, 2016 7:19 am
by soho
zoelechat wrote:libPVRdumpkeys.so doesn't need execution rights, samyGOso does
Also check if you don't have empty (0 bytes) .key's in CONTENTS folder. If so, delete them all.
samyGOso found in 3 Folders: /mnt/opt/privateer/usr/bin, /mtd_rwcommon, /mtd_rwarea. All 3 had +x but the 2 in rw were smaller than the 3rd one. So I replaced the 2 in rw with the 3rd in /mnt... I also checked the .key-files, None existing in CONTENTS. Still not working, keys can't be extracted for the newer recordings.
I had a new USB stick formated in the TV and then recorded a short broadcast on it, could be decrypted without Problems. I then copied the files for the latest recording from the fat USB disc (500+ recordings) to this new stick, from there it could also be decrypted without Problems in the PVR Decoder.
Therefore I still think that the dumpkey runs into a timeout somewhere.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Tue Apr 26, 2016 8:39 am
by zoelechat
Well I don't think it's a matter of "timeout", but I'm not so surprised DumpKeys fails with "500+"
recordings. Time to cleanup I'd say
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Tue Apr 26, 2016 8:56 am
by soho
I think it has a direct relation to the amount of files, the size of files, the harddisc needing more time to provide the Directory tree, etc. but I agree totally that These are a lot of recordings and cleanup is a very good idea
Just had 3 new recordings from April copied from the fat harddisc sdb1 to the empty memorystick sda1, from there the decryption went seamless...
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Tue Apr 26, 2016 12:22 pm
by soho
I think I finally found the solution to my Problem
. It has nothing to do with the fact that all recordings not working seem to be added at the end of the existing harddisc, that the harddisc is too fat or that there is any latency in the Hardware / Network. The solution why the keys are not extracted anymore starting from end-of-march is much more simple. See Spoiler below for the solution.
Thanks again to zoelechat and lordbyte for both the Support and the good PVR Decoder
3rd Weekend of March starts daylight saving time. Somehow the program was not able to find the appropriate key file, I changed the Setting 'local TV time offset' from AUTO to ADD and added 2 hours. Voil?
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Tue Apr 26, 2016 12:29 pm
by Lordbyte
Sophiaticated bug
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Thu Apr 28, 2016 3:55 pm
by ciroxl
Can not download samyGOPVRDecoder_1.8.2.53.zip.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Thu Apr 28, 2016 5:44 pm
by zoelechat
Problem must be on your side, all links are working.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sat Apr 30, 2016 9:51 am
by ciroxl
zoelechat wrote:Problem must be on your side, all links are working.
Well thank you. Problem was my antivirus program.
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Sat Apr 30, 2016 9:59 am
by zoelechat
Right, some stupid antiviruses are considering netcat module as suspicious. You can be trustful, it's guaranteed 100% virus free
Re: [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Posted: Thu May 19, 2016 4:35 pm
by ragnarok32
Hi,
I've a problem when I'm playing on PC the Pvr recordings that I've decoded with the 1.8.2.53 version and the precedent version.
My Tv is 50UEH6400 : it's rooted but I don't have done anything more.
The recordings was made before the root : I've artefacts with the TS file (and I've a lots of recordings that I want to recover.)
I give you a sample :
https://drive.google.com/file/d/0B4ob0Y ... sp=sharing
Thank you in advance