Re: [!!!] Rooting H series
Posted: Wed Dec 31, 2014 7:39 am
Fat32 should be ok
Samsung TV Firmware on the GO
http://forum.samygo.tv/
After that the root procedure is complete, i copied the SamyGo directory (from the fat 32 usb) into the pvr usb, is not needed to get a different partition, fat32 is needed for the installation.marius2du wrote:Hmm, kinda difficult to achieve that since for recording you need EXT2 partition... Unless you create 2 partitions onto usb stickYou may try to copy WHOLE SamyGO directory from your rooting usb to usb that is used for recordingsthen you will have one recording/rooting usb
Hello,juuso wrote:Fat32 should be ok
Please see log file from my USB - I think something is wrong? Could you check it?spiderjuka wrote:Hello,juuso wrote:Fat32 should be ok
I'm after root procedure.
Nothing was change on my TV???
How Can I check if my TV is rooted?
Could you write me steps what shoudl I do?
How I can activate samba?
I have NAS serwer with samba protocol - user: tv; password: xxxxx; Server IP: 192.168.100.36
Thank you.
Unfortunatelly I can't connect to TV via Telnet.spiderjuka wrote:Please see log file from my USB - I think something is wrong? Could you check it?spiderjuka wrote:Hello,juuso wrote:Fat32 should be ok
I'm after root procedure.
Nothing was change on my TV???
How Can I check if my TV is rooted?
Could you write me steps what shoudl I do?
How I can activate samba?
I have NAS serwer with samba protocol - user: tv; password: xxxxx; Server IP: 192.168.100.36
Thank you.
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)
Thank you.
Lol didn't you read previous posts at all? Everything was already described... Just see your own log:spiderjuka wrote: Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)
Thank you.
Code: Select all
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt
mount: mounting /tmp/loopnone on /mnt failed: Input/output error
sectroyer wrote:Lol didn't you read previous posts at all? Everything was already described... Just see your own log:spiderjuka wrote: Please see log file from my USB - I think something is wrong? Could you check it?
My TV is 55H7000. Firmware: 2122
USB - kingston 8GB - format files FAT32 (formated)
Thank you.Nothing more to say. Same issue as Deus3XCode: Select all
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img + /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt mount: mounting /tmp/loopnone on /mnt failed: Input/output error
Is it possible that you could read previous posts and check EXACTLY what worked for DeusX3?spiderjuka wrote: I'm sorry.
I'm not good at it.
If it possible could you write me what should I do?
Thank you.
To resume, it seems that having both a recording device AND the rooting USB attached helps. Check Telnet then.sectroyer wrote:Shut down TV. Unplug usb with rooting data. Plug one of your Free usb disk. Start TV and once it loads hit RECIt will ask if it can format the disk format and recording something than get back shutdown tv attach SECOND usb (the one with rooting data), start TV