SamyGO

fromul wrote: ↑Thu Feb 24, 2022 9:38 am is there anyone here whose sambilight fully works on E series (with GFX_LIB=1) ?

If you send me the necessary files from your TV, maybe i can make it work gfx_lib on E series too.

I need;
/mtd_uncompexe/exeAPP
/mtd_uncompexe/exeTV
/mtd_uncompexe/lib/libUTOPIA.so
/mtd_uncompexe/lib/libSDAL.so

so...you need this files:

/mtd_uncompexe/exeAPP
/mtd_uncompexe/exeTV
/mtd_uncompexe/lib/libUTOPIA.so
/mtd_uncompexe/lib/libSDAL.so

but in my file structure folder /mtd_uncompexe/ don´t exist. I find in this folder only:
/mtd_exe/libUTOPIA.so
/mtd_exe/libSDAL.so

...exeAPP and exeTV did´t find
...i see only exeDSP file (125MB) in /mtd_exe/ folder
...maybe can i try downgrade to lower nr. of T-MST firmware? I tryed older 2007 and there exeAPP and exeTV missing too.

Hi guys, my LED's at this moment on the left side of the tv are almost always red, as attached below. Will it be normal?

1) check wire connection between each stripes
2) have you an adequate power supply for LED stripe? 12V? 5V? Adequate Amperes in relation to number of LED´s?
3) have you correct number of LEDs in Arduino sketch and same number in 01_99_libSambilight.init?

brunogts77 wrote: ↑Sat Apr 09, 2022 8:07 pm Hi guys, my LED's at this moment on the left side of the tv are almost always red, as attached below. Will it be normal?

You can disable the init file and test your configuration, please check the "Testing" section of the first post. You need to test all profiles with TEST_PROFILE parameter.

What file should I put on Arduino? I'm using "Adalight-fastLED"! Or should I use "sambilight"?

brunogts77 wrote: ↑Mon Apr 11, 2022 9:48 pm What file should I put on Arduino? I'm using "Adalight-fastLED"! Or should I use "sambilight"?

Adalight protocol is OK, but why invent something that's already been invented, all necessary files are attached to 1. post from Tasshack...only modify number of LEDs in attached arduino sketch.

This is my sambilight log:
LED's don't work!

brunogts77 wrote: ↑Wed Apr 13, 2022 9:34 pm This is my sambilight log:
LED's don't work!

Code: Select all

  [Sambilight] SamyGO E/F/H libSambilight v1.2.11 - (c) tasshack 2019 - 2021
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t' failed.
[Sambilight] dlsym '_Z23SdDisplay_CaptureScreenP8SdSize_tPhP23SdDisplay_CaptureInfo_t12SdMainChip_k' failed.
[Sambilight] _Z23SdDisplay_CaptureScreenP8SdSize_tPhP24SdVideoCommonFrameData_tP8SdRect_t12SdMainChip_k [0x6dab30].
[Sambilight] _Znwj [0x10d5e58].
[Sambilight] dlsym '_ZN4SCGCC2El' failed.
[Sambilight] dlsym '_ZN8SCBaseGC6CreateEv' failed.
[Sambilight] dlsym '_ZN4SCGC7DestroyEv' failed.
[Sambilight] dlsym '_ZN4SCGCD2Ev' failed.
[Sambilight] dlsym '_ZN4SCGC5ClearEPN6Shadow9BasicType4RectE' failed.
[Sambilight] dlsym '_ZN8SCBaseGC5FlushEPN6Shadow9BasicType4RectE' failed.
[Sambilight] dlsym '_ZN4SCGC8FillRectEN6Shadow5ColorEllll' failed.
[Sambilight] dlsym '_ZN4SCGC8DrawTextEllPtl' failed.
[Sambilight] dlsym '_ZN4SCGC11SetFontSizeEl' failed.
[Sambilight] dlsym '_ZN4SCGC7SetFontEP6SCFont' failed.
[Sambilight] dlsym '_ZN4SCGC12SetFontStyleEl' failed.
[Sambilight] dlsym '_ZN4SCGC10SetFgColorEN6Shadow5ColorE' failed.
[Sambilight] dlsym '_ZN14CUSBAppResUtil14GetDefaultFontEv' failed.
[Sambilight] g_IPanel [0x43494aa0].
[Sambilight] dlsym 'g_TaskManager' failed.
[Sambilight] dlsym 'g_pTaskManager' failed.
[Sambilight] dlsym 'g_TVViewerMgr' failed.
[Sambilight] dlsym 'g_pTVViewerMgr' failed.
[Sambilight] dlsym 'g_TVViewerWStringEng' failed.
[Sambilight] dlsym 'g_WarningWStringEng' failed.
[Sambilight] dlsym 'g_pCustomTextResMgr' failed.
[Sambilight] dlsym 'g_CustomTextWStringEng' failed.
[Sambilight] dlsym '_ZN16CResourceManager10GetWStringEi' failed.
[Sambilight] _ZN9PCWString7ConvertEPtPKciiPi [0x10d7ad0].
[Sambilight] dlsym '_ZN12CTaskManager14GetApplicationE15DTV_APPLICATION' failed.
[Sambilight] dlsym '_ZN10CViewerApp16GetViewerManagerEv' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager11GetInstanceENS_13EDesktopIndexE' failed.
[Sambilight] dlsym '_ZN10ALMOND030015CDesktopManager14GetApplicationEPKcS2_' failed.
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEii' failed.
[Sambilight] dlsym '_ZN14CViewerManager15ShowSystemAlertEi' failed.
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEi' failed.
[Sambilight] dlsym '_ZN14CViewerManager14ShowCustomTextEib' failed.
[Sambilight] dlsym '_ZN14CViewerManager10ShowRCModeEi' failed.
[Sambilight] dlsym '_ZN14CCustomTextApp13t_OnActivatedEPKci' failed.
[Sambilight] MsOS_PA2KSEG0 [0x430c8360].
[Sambilight] MsOS_Dcache_Flush [0x430c8194].
[Sambilight] MApi_MMAP_GetInfo [0x430615bc].
[Sambilight] MApi_XC_W2BYTEMSK [0x43259ec4].
[Sambilight] gfx_InitNonGAPlane [0x430753e4].
[Sambilight] gfx_ReleasePlane [0x430806c8].
[Sambilight] gfx_CaptureFrame [0x43087cd0].
[Sambilight] gfx_BitBltScale [0x4307e2ac].
[Sambilight] MApi_GOP_DWIN_CaptureOneFrame [0x430df6f8].
[Sambilight] MApi_GOP_DWIN_GetWinProperty [0x430e1b74].
[Sambilight] Sambilight started
[Sambilight] H_LEDS: 119, V_LEDS: 65, BOTTOM_GAP: 7, START_OFFSET: 68, COLOR_ORDER: RGB, CAPTURE_POS: 1, CLOCKWISE: 1
[Sambilight] 480x270 30ms
[Sambilight] -------------1-------------
[Sambilight] Name: 16:9
[Sambilight] Saturation Gain: 130%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 26%
[Sambilight] Vertical Depth: 15%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------2-------------
[Sambilight] Name: 21:9
[Sambilight] Saturation Gain: 120%
[Sambilight] Value Gain: 90%
[Sambilight] Brightness Correction: -7
[Sambilight] Horizontal Depth: 15%
[Sambilight] Vertical Depth: 7%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 12%
[Sambilight] Vertical Padding: 0%
[Sambilight] -------------3-------------
[Sambilight] Name: 4:3
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 12%
[Sambilight] -------------4-------------
[Sambilight] Name: 3:2
[Sambilight] Saturation Gain: 100%
[Sambilight] Value Gain: 100%
[Sambilight] Brightness Correction: 0
[Sambilight] Horizontal Depth: 12%
[Sambilight] Vertical Depth: 12%
[Sambilight] Overlap: 0%
[Sambilight] Horizontal Padding: 0%
[Sambilight] Vertical Padding: 8%
[Sambilight] 4 Profile(s) Loaded From Config
[Sambilight] Serial acm available /dtv/ttyACM0
[Sambilight] Serial open
[Sambilight] Led manager init
[Sambilight] Panel size 1920x1080
[Sambilight] gfx_lib not enabled
[Sambilight] Grabbing started
  

You should install prismatik and test your arduino + leds setup on a windows PC.

I've already tested the LED's with Hyperion and it doesn't work....