SamyGO

device HT-D5550

after 86% its restarting download again, tried coldstart and reset. but still same. no sucess

Hello all. I am new to forums and ask for your patience. Unfortunately, I upgraded my BD-D5100 firmware from 10-016 to BSP-D5100WWB-021.1 which has caused the cinavia problem. Where can I get firmware to downgrade. The BD-D5100 connects to the internet ok hence the unfortunate update.Thanks

Curtis2007, I see from one of your posts dated July 08, 2012 that you have BSP-D5100WWB-1019.3 on your PC. Is it possible for me to get a copy of this so that I can downgrade my firmware from BSP-D5100WWB-1021.1.

The idea is that I upgrade from a USB

Thanks

albaman

albaman wrote:Curtis2007, I see from one of your posts dated July 08, 2012 that you have BSP-D5100WWB-1019.3 on your PC. Is it possible for me to get a copy of this so that I can downgrade my firmware from BSP-D5100WWB-1021.1.

The idea is that I upgrade from a USB

Thanks

albaman

its not possible to downgrade from usb mate all you will get is the player has latest firmware installed hence looking for a bit of help on the forum, my problem is vermins superhub wont let me do a thing http wise with port 80 if anyone had the same problem with this pile of junk they dish out to customers i'd be grateful, tried port forwarding/port triggering/dmz and still the same problem, next is a hammer.

curtis2007, sorry for being so dense. Now I understand why you were trying to get connected to a server for download. I assume that downgraded firmware is available on vermins superhub

Thanks

albaman

curtis2007 wrote:...
its not possible to downgrade from usb mate all you will get is the player has latest firmware installed hence looking for a bit of help on the forum, my problem is vermins superhub wont let me do a thing http wise with port 80 if anyone had the same problem with this pile of junk they dish out to customers i'd be grateful, tried port forwarding/port triggering/dmz and still the same problem, next is a hammer.

don't now about "superhub" but if you can browse in internet from your computer then it "should" be possible to downgrade firm too.

what you get from your computer if you go to: http://infolink.zsolttech.com/myenv.php
and (on windows) start -> run -> cmd

Hi,

Should this work for my Bluray Freeview recorder? At the moment I'm just getting a timeout error code 801

Wayne

Model Code: BD-D8500M-XU
Software Version: BPH-D8500EUB-1010.1

Currently running B-BRCM65BSP 1023.0 on my model BD-D6500/ZA.

My firmware; SWU_B-BRCM65BSP_001023_I05_ES000KS000RS000DS000BS000_120204

This isn't specifically listed on the original post, though a similar one is. Has anyone had any luck downgrading this version?

I tried downgrading a BD-D6500 from firmware 1022 (2012/01/17), but for some reason after updating DNS and cold boot, it offered firmware 1028 (2012/06/21). Was that supposed to happen?

Before DNS change the 1028 firmware was never offered, so I assumed it was a SamyGO fixed version and installed it. Now I see it is real 1028 version with same problems as before. Any plans to support downgrading from this version now? I can "guinea pig" if needed.

arris69 wrote:

curtis2007 wrote:...
its not possible to downgrade from usb mate all you will get is the player has latest firmware installed hence looking for a bit of help on the forum, my problem is vermins superhub wont let me do a thing http wise with port 80 if anyone had the same problem with this pile of junk they dish out to customers i'd be grateful, tried port forwarding/port triggering/dmz and still the same problem, next is a hammer.

don't now about "superhub" but if you can browse in internet from your computer then it "should" be possible to downgrade firm too.

what you get from your computer if you go to: http://infolink.zsolttech.com/myenv.php
and (on windows) start -> run -> cmd

Code: Select all

ipconfig /flushdns
nslookup www.samsungotn.net infolink.samygo.tv

C:\Documents and Settings\****>ipconfig /flushdns

Windows IP Configuration

Successfully flushed the DNS Resolver Cache.

C:\Documents and Settings\****> nslookup http://www.samsungotn.net infolink.samygo.t
v
*** Can't find server name for address 46.4.199.222: Query refused
Server: UnKnown
Address: 46.4.199.222

Name: infolink.samygo.tv
Address: 46.4.199.222
Aliases: http://www.samsungotn.net

--------------------------------------------------------------------------------------------------------------------------------------
Array
(
[UNIQUE_ID] => T-2r1n8AAAIAAHg4Ti0AAAAH
[GEOIP_ADDR] => **.*.***.**
[GEOIP_CONTINENT_CODE] => EU
[GEOIP_COUNTRY_CODE] => GB
[GEOIP_COUNTRY_NAME] => United Kingdom
[GEOIP_REGION] => I5
[GEOIP_REGION_NAME] => Middlesbrough
[GEOIP_CITY] => Middlesbrough
[GEOIP_DMA_CODE] => 0
[GEOIP_AREA_CODE] => 0
[GEOIP_LATITUDE] => 54.572800
[GEOIP_LONGITUDE] => -1.162800
[PERL5LIB] => /usr/share/awstats/lib:/usr/share/awstats/plugins
[VLOG] =>
[HTTP_HOST] => infolink.zsolttech.com
[HTTP_USER_AGENT] => Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1
[HTTP_ACCEPT] => text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
[HTTP_ACCEPT_LANGUAGE] => en-us,en;q=0.5
[HTTP_ACCEPT_ENCODING] => gzip, deflate
[HTTP_CONNECTION] => keep-alive
[HTTP_REFERER] => viewtopic.php?f=18&t=4244&p=33367
[PATH] => /sbin:/usr/sbin:/bin:/usr/bin
[SERVER_SIGNATURE] =>
[SERVER_SOFTWARE] => Apache/2.2.9 (Mandriva Linux/PREFORK-12.9mdv2009.0)
[SERVER_NAME] => infolink.zsolttech.com
[SERVER_ADDR] => 80.109.59.7
[SERVER_PORT] => 80
[REMOTE_ADDR] => **.*.***.**
[DOCUMENT_ROOT] => /home/Video-HD/Samsung/infolink.pavv.co.kr
[SERVER_ADMIN] => root@localhost
[SCRIPT_FILENAME] => /home/Video-HD/Samsung/infolink.pavv.co.kr/myenv.php
[REMOTE_PORT] => 1493
[GATEWAY_INTERFACE] => CGI/1.1
[SERVER_PROTOCOL] => HTTP/1.1
[REQUEST_METHOD] => GET
[QUERY_STRING] =>
[REQUEST_URI] => /myenv.php
[SCRIPT_NAME] => /myenv.php
[PHP_SELF] => /myenv.php
[REQUEST_TIME] => 1342024662
)
got that mate from cmd prompt and the link you gave me if thats any help on whats happening