SamyGO

in folder samsung tv root / mnt / file sam.log is getting bigger and bigger, now is 5mb every time i turn on tv when usb is plugged

is safe to delete sam.log file?

yes

Hi guys,

just tried to set the autostart option for SamyGo after (in my opinion) succesful installation:
Hardware Info & Settings I followed the installation with a FAT formated USB Stick (not FAT32) step by step.
everything worked fine, except the NO?s as on the attached pic.

Reboot was done with disconnecting the plug, installation of the SamyGo Fix done twice ...

Waited for at least 5 minutes after reboot both times

What am i doing wrong?
Thx in advance for tips or links, i must admit, i didn?t read all the 118 pages of the thread ...

Humorator wrote:...autostart...
What am i doing wrong?
... i didn?t read all the 118 pages of the thread ...

No need to read 118 pages, first post carefully is enough to know that this part doesn't concern your model (MST)

Thx for your reference.

Unfortunately i can't connect via static LAN-IP of the device to SamyGo neither by putty, telnet or filezilla nor by winscp... I tried the standard protocol ports (for example ftp on port 21 etc)

Connection refused

Im sure, the "Problem" is just "3 yards in front of the screen" (in other words: me;))
Will stop for today and try and read it again the Day after tomorrow

EDIT... Ups ... Spoiler ... I really have to go to sleep;)

Model: UE32F6470
Firmware: T-MST12DEUC-2104.2
Root was succesful, but only telnet won't work. Nmap don't show telnet:

Nmap scan report for SamsungTV.fritz.box (xxx)
Host is up (0.0015s latency).
Not shown: 990 closed ports
PORT STATE SERVICE
21/tcp open ftp
33/tcp open dsp
80/tcp open http
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1080/tcp open socks
4443/tcp open pharos
6000/tcp open X11
7676/tcp open imqbrokerd

After reboot/power off TV someone won't work:
Nmap scan report for SamsungTV.fritz.box (xxx)
Host is up (0.00019s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
80/tcp open http
443/tcp open https
4443/tcp open pharos
6000/tcp open X11
7676/tcp open imqbrokerd

Can anybody help me, please?

---

Okay ... i'm a little bit stupid - the usb stick with SammyGo must stay connected into the tv?

Yes. All the time.

(OK, i'm not so stupid, not at all ...)
Please add this to the 'Preliminaries':
- The usb stick with SamyGo must stay connected into the TV. All the time. Otherwise SamyGo won't work.

Thank's for SamyGo!

Something like this?

1ST POST wrote:

!	WARNING!!!! DON'T EXPECT HACK TO BE WORKING CORRECTLY IF YOU EVER UNPLUG ROOTING USB !!!!!!

Sometimes is really funny here at SamyGO...

The notes are so big and red that they are not noticed anymore - like too often shown advertising...