SamyGO

That's right but in between times it started correctly O.o

Joejoe wrote:That's right but in between times it started correctly O.o

What ?

After the update of the firmware there was one time the root works correct and I got access on my NAS over a virtual USB.

viewtopic.php?f=70&t=7982&start=1160#p72600
viewtopic.php?f=70&t=7982&start=1170#p72659

But after a reboot the root doesn't work anymore.

Joejoe wrote:After the update of the firmware there was one time the root works correct and I got access on my NAS over a virtual USB.

viewtopic.php?f=70&t=7982&start=1160#p72600
viewtopic.php?f=70&t=7982&start=1170#p72659

But after a reboot the root doesn't work anymore.

Well this proves it was stupid to update Now you have to wait until somebody finds a way to make it work

P.S. Maybe factory reset will help

I also tried several factory resets.
After the firmware update everytime i take care of the OTN Support option but it's always "Off"

On rooting log i got everytime the OK behind "Existing '/mtd_rwcommon/SamyGo/rcSGO' but the script doesn't start. So i will not get the OK for '/dtv/SamyGo_OK' isn't it?

witgit wrote:Hello every one!
Procedure to root tv series ES with evolution kit sek-2000 is different?
What method do I root my tv?

Can anybody answer my question?
I would be grateful.

Is it nessecary to connect also the pc to the lan router during this rooting procudere or is it sufucient to only have the router/lan connected i have a UE46F6320 tv

witgit wrote:Procedure to root tv series ES with evolution kit sek-2000 is different?
What method do I root my tv?

Can anybody answer my question?
I would be grateful.

If you're lucky, you could get *minimal* root (=ftp/telnet but no extensions) using this. Except that, evokits are simply unsupported by SamyGO.

Hi rmaas56,

in my opinion it's not necessary for the rooting procedure that the PC is connected to LAN.
But to get access to the scripts you want to change you have to use a telnet software to connect to your TV.

Greetz Joe

Joejoe wrote:I also tried several factory resets.
After the firmware update everytime i take care of the OTN Support option but it's always "Off"

On rooting log i got everytime the OK behind "Existing '/mtd_rwcommon/SamyGo/rcSGO' but the script doesn't start. So i will not get the OK for '/dtv/SamyGo_OK' isn't it?

Nope you first get /dtv/SamyGo_OK and IF it works you might get other stuff