Page 14 of 28
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 12:21 pm
by tempinbox
I i want to do the tester for that project but i'm not an expert so i need help.
I have a c series tv...I'm a little bit confuse: the modules of this web interface are only for d series?
i have my tv c series with samygo extension telnet ssh e ftp access.
so what i've to do to obtain this userfriendly web interface is there one step by step guide to follow?
i know that c series is obsolete now but for those that has this series of tv this web interface will be more useful.
I hack my tv using the usb disk image so i have one webinterface that is that created by yandex.
So i'm thinking if i download samygo extension and replace the files with yours i obtain you webinterface.
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 2:13 pm
by juusso
Files are not only for D series. But curent version of files are tuned for D series. Means some functions can not work.
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 6:52 pm
by tempinbox
On c series uec6000 doesn't work first time i get the message
Code: Select all
. /dtv/SGO.env; wget "http://forum.samygo.tv/download/file.php?mode=view&id=1136" -O /dtv/install.tar; tar -mvxf /dtv/install.tar -C /
--00:51:11-- http://forum.samygo.tv/download/file.php?mode=view&id=1136
=> `/dtv/install.tar'
Resolving forum.samygo.tv... 46.4.199.222
Connecting to forum.samygo.tv[46.4.199.222]:80... failed: Address family not supported by protocol.
Connecting to forum.samygo.tv[46.4.199.222]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10,240 [application/octet-stream]
0K .......... 100% 532.68 KB/s
00:51:26 (532.68 KB/s) - `/dtv/install.tar' saved [10240/10240]
dtv/
dtv/cgi-bin/
dtv/cgi-bin/Modules.cgi
and the page says error 404 not found.
So what i've to do?
I want this webif in my c series tv!!!!
Is there a solution to manually install the webIf files and modules?
I have telnet, ftp, ssh access to my tv i use samygo extension for c series so what can i do?
DEUS Why you don't create all in one pack and release it like the samygoextension pack released by Arriss??
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 7:03 pm
by juusso
tempinbox wrote:
Is there a solution to manually install the webIf files and modules?
now you have to navigate to
http://yourTVIP/cgi-bin/Modules.cgi
then press Online and install main webif module and other modules...
I have telnet, ftp, ssh access to my tv i use samygo extension for c series so what can i do?
DEUS Why you don't create all in one pack and release it like the samygoextension pack released by Arriss??
The webif is in developement, it is not ready for releasing. yet. If yo uhave some bash knowledge (or php) you could adapt it for C series. None from us have C series TV.
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 7:24 pm
by tempinbox
Code: Select all
/mtd_rwarea/network_opt # cd ..
/mtd_rwarea # cd ..
/ # cd dtv
/dtv # ls -a
. event1 input
.. event2 locked
.SamyGO_startup_run_once event3 network_first_stsrt_ok
.ashrc event4 network_opt
.auth_finish firmware pcm_in
.bb fuse pcm_out
PART_FLAG_1 hidraw0 socket
SGO.env hidraw1 usb
Startup.log hidraw2 video_in
YWE hidraw3 video_out
env_export hidraw4 vusb
event0 info
/dtv # . /dtv/SGO.env; wget "http://forum.samygo.tv/download/file.php?mode=view&
id=1175" -O /dtv/install.tar; tar -mvxf /dtv/install.tar -C /
--00:02:49-- http://forum.samygo.tv/download/file.php?mode=view&id=1175
=> `/dtv/install.tar'
Resolving forum.samygo.tv... 46.4.199.222
Connecting to forum.samygo.tv[46.4.199.222]:80... failed: Address family not supported by protocol.
Connecting to forum.samygo.tv[46.4.199.222]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 10,240 [application/octet-stream]
100%[====================================>] 10,240 25.58K/s
00:02:50 (25.52 KB/s) - `/dtv/install.tar' saved [10240/10240]
dtv/
dtv/cgi-bin/
dtv/cgi-bin/Modules.cgi
/dtv # ls -a
. event1 install.tar
.. event2 locked
.SamyGO_startup_run_once event3 network_first_stsrt_ok
.ashrc event4 network_opt
.auth_finish firmware pcm_in
.bb fuse pcm_out
PART_FLAG_1 hidraw0 socket
SGO.env hidraw1 usb
Startup.log hidraw2 video_in
YWE hidraw3 video_out
cgi-bin hidraw4 vusb
env_export info
event0 input
This is my situation
then as you (juuso) write i go to http://192.1**.*.***/cgi-bin/Modules.cgi
and i get
Code: Select all
404 Not Found
The requested URL was not found
the install tarball is saved to dtv folder and the cgi-bin folder is created and then in it there is one file: Modules.cgi
my tv is of the valdeuc family
in mtd_rwcommon there is the folder call temp
so why i get this error message???
Re: New web inferface (Webif) for SamyGO
Posted: Sat May 19, 2012 7:48 pm
by arris69
what you get if you go to http://192.1**.*.***/phpsysinfo/ ?
if also 404 error then you have mixed enviroment from hotelmode hack and extensions pack
Re: New web inferface (Webif) for SamyGO
Posted: Sun May 20, 2012 10:52 am
by tempinbox
arris69 wrote:what you get if you go to http://192.1**.*.***/phpsysinfo/ ?
if also 404 error then you have mixed enviroment from hotelmode hack and extensions pack
You're right.
so what i've to do?
could you explain me what pack of 3 files i've to download for my tv?
in download sections the are 3 files
1 - http://sourceforge.net/projects/samygo/ ... p/download
2 - http://sourceforge.net/projects/samygo/ ... p/download
3 - http://sourceforge.net/projects/samygo/ ... p/download
so i download version r12 i overwrite in it the pack of version r15 and then i copy the libraries from pack T-VALDEUC-20110123101934.zip
Is that right?
Please Arris reply because i'm a little bit confuse.
Maybe i've to format mtd-rwarea re-hack with usb img disk and then restart samygo extension?
Re: New web inferface (Webif) for SamyGO
Posted: Sun May 20, 2012 11:00 am
by juusso
Sorry tempinbox, you gona offtopic. All stuf you`re asking is related to SamyGO Extensions for C series but not to WebIF we`re talking here about.
Check this wiki page and topic.
Re: New web inferface (Webif) for SamyGO
Posted: Sun May 20, 2012 10:10 pm
by brunogts77
Hi. Good evening. I'm having trouble accessing online modules! When I insert "
http://192.168.1.9/cgi-bin/Modules.cgi?var_a=online" does not appear to install the modules! Anyone can help me?
Re: New web inferface (Webif) for SamyGO
Posted: Mon May 21, 2012 12:57 am
by DEUS
brunogts77: need apache_error_log (use "code" when post here) and maybe try to run Modules.cgi from TV via shell