SamyGO

juuso wrote:Now RC_over_LAN_mod_Android works fine for me over wifi and GPRS too.
(Got it working by changing to 3G network, but after this works on 2G as well )

Oh, one issue- power OFF button does not work for me...

Today i played a little with sbav1`s tool "Keycode input box" and found some extra keys:
514 - FactoryReset and power off (same as FactoryReset from SM, date of purchase set to today, i needed to set debug and watchdog off from SM again, EDID fail - needed it on and set to write to get success)..

I think these codes are related to PIP or its behavior is similar to ttx screen splitting. (info for adding some extra sources to pip? - 528)
520 - divides screen to 2 parts
521 - back to full screen
522 - back to full screen
523 - another screen divide
528 - PIP to full screen and switch to analog channel, no volume at all...

529 - get caption "working" on screen
530 - get caption "not working" on screen

And now - i was a little scared about after i entered:
531 - gave FW version on screen blinking in red and strange - i couldn`t get from this "state", no power off from RC, TV`s behavior got strange... I think i sent some Factory RC keys to my TV...
I got TV stand by by key 152 (finaly after some researching codes from 500 to 1000 ) and TV was back to normal state.

533 - some Service menu settings on the screen. Get back by pressing 533 again.

funnel20 wrote:I'm currently working on an iPhone app for the B-series Remote.

- I saw the Android app from Tom Quist (http://quist.de/2011/02/remote-control- ... e/?lang=en). He also published his source code, including the graphical images for the buttons. Same questions apply here when I want to re-use these images.