SamyGO

gjstroom wrote: OK, I downgraded from 1128.1 to 1115.0, but I still have the same issues I had with 1128.1.
I also did several factory resets, I use the new root method, not the Skype root hack.

Yeah factory reset is a WONDERFUL way to BRICK tv

sectroyer wrote:Yeah factory reset is a WONDERFUL way to BRICK tv

*Only on H with latest root in some "unlucky" cases, no need to frighten people freely

gjstroom wrote:I have some problems with the root of my 46F8090 (T-FXPDEUC_1128.1).
It looks like the samygoautostart doesn't work properly, I have some weird issues.
Normally I watch tv via a VU+ Solo SE connected by hdmi and Anynet+ enabled.
When I switch on the tv my receiver and Vu+ also power on by hmdi-cec. Sometimes the root starts, sometimes not, it looks like it's waiting for something. Then sometimes when I go to the tv menu the root becomes activated, but also not every time.
When I switch to tv, sometimes it works, but also sometimes the tv becomes unresponsive and restarts. When it works, the root starts when I switch to an encrypted channel.
Mostly when I switch on the tv in tv mode the root works instant, but also it becomes activated when switching to a encrypted channel.
I also have lots of issues with connecting and disconnecting Anynet+.
Anny suggestions ?

So downgrading and factory reset did not solve this problem.
Anything else I can try to solve it ?
TV was rooted in the past with the skype method and later with the new usb method, is it possible some parts of the skype root process are still present on my tv ?
How to check this ?

i still have problem with files via network every file when is played for first time after 2 min blocks smygo and restarts tv. After that when same file is played everything is ok, next file after i watched again blocks tv and restarts.
zoelchat please help, any error log or something ? cache clean ?

errr... Why me? No idea

is there any log for sudden crash?
usb is always pluged in f5300

/mnt/etc/init.d/01_01_catch_crap.init start stop

Status:
/mnt/etc/init.d/01_02_telnet.init start stop

Status:
/mnt/etc/init.d/02_04_vusb.init start stop

Status:
Flash Disk
Virt. USB
/mnt/etc/init.d/02_06_crypto_load.init start stop

Status:
/mnt/etc/init.d/03_01_fuse.init start stop

Status:
/mnt/etc/init.d/04_04_samba.init start stop

Status:
//192.168.0.100/TV on /dtv/usb/sdb/smb/192.168.0.100/TV type cifs (rw,mand,relatime,sec=ntlm,unc=\192.168.0.100\TV,username=user,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.0.100,file_mode=0755,dir_mode=0755,nounix,rsize=16384,wsize=131007,actimeo=1)
/mnt/etc/init.d/06_05_apache.init start stop

Status:
tcp 0 0 0.0.0.0:1080 0.0.0.0:* LISTEN 1425/httpd
tcp 0 10 192.168.0.15:1080 192.168.0.100:52385 ESTABLISHED 1433/httpd
/mnt/etc/init.d/06_05_samba-server.init start stop

Status:
1424 1418
/mnt/etc/init.d/99_99_RCremap.init start stop

Status:

PrinzEugen wrote:i still have problem with files via network every file when is played for first time after 2 min blocks smygo and restarts tv. After that when same file is played everything is ok, next file after i watched again blocks tv and restarts.
zoelchat please help, any error log or something ? cache clean ?

You played it imediatly after tv on or first run Start SamyGo App?
In my case i need run full start SamyGo App and only after play files from other device...

usb is plugged always,no need to root every time.
i wait a little to virt.usb get connected and after some time i played a file, there is no connection with time interval ,waiting 5 min at most (tried even more) after all no commands worked and after 2 min everything crashes.

any clues?

Hello there,
I understand this correctly , for F Series I do not disable OTN suport ?
In the router everything is blocked for safety reasons.
My firmware 11.24.0
Can I normally rooten with usb then ?

Thank you Dont give me a shitstorm ( Ich kann kein Englisch )

Disable OTN Support ASAP!!!!!