SamyGO

What's fast root?

How do you use libFWdowngrade?

I can't send commands, do you know how to fix that?

Do you have SamyGO widget? Is it useful at all?

RypeDub wrote:What's fast root?

How do you use libFWdowngrade?

I can't send commands, do you know how to fix that?

Do you have SamyGO widget? Is it useful at all?

What did u do?

Did u read the libFWdowngrade topic? it explains all

U can't send commands? do u have root acces?

do u know how to use putty/telnet?

I rooted using the InstallSamyGO method and I have root access.

The root files are on my TV and I can FTP/SSH over.

Yes, I know how to use PuTTy/telnet/terminal/etc. When I enter commands it says tty isn't enabled or something similar, I posted it in other posts of mine.

I did read the downgrading topic but since I couldn't execute commands I figured maybe it wasn't for me. That's why I just wanted to know whats a benefit of downgrading.

d3lta wrote:Succesfull on EU48H6400 T-MST14DEUC-2781.0 BT-S/G

Downgrade to T-MST14DEUC-2130.0 then used the Skype root methode.

Running perfect now on 2130.0

Thank u

No need to give the software back to 2130, I managed method for latest firmwares
I managed root method USB memory stick 2: one used to record a memory stick and another with two folders: InstallSamyGO-H and SamyGO
I have H6400 T-MST14DEUC-2781 and work oscam for satelit and cable

horatyu wrote:
No need to give the software back to 2130, I managed method for latest firmwares
I managed root method USB memory stick 2: one used to record a memory stick and another with two folders: InstallSamyGO-H and SamyGO
I have H6400 T-MST14DEUC-2781 and work oscam for satelit and cable

Hello can you explain , how are you gettting running oscam stable on latest firmware 2781??.Thx

after root:

HOW TO OSCAM

1: unpack it and upload the oscam folder to /mnt/opt/privateer/usr/bin.
2:Copy only the libOscamX_buildXXX.so file containing the letter of your tv series to the newly created /mnt/opt/privateer/usr/bin/oscam folder.
3:To enable the autorun, copy 05_05_Oscam.init to /mnt/etc/init.d/.
4:Download samyGOso_v1.2.5.zip from here and unzip it.
Then copy the file samyGOso from the unzipped folder \samyGOso\out-\ to the tv?s folder /mnt/opt/privateer/usr/bin/.
Make sure you replace the existing one.
5:Add executable attribute with Putty !!!
CODE:
chmod 755 /mnt/opt/privateer/usr/bin/samyGOso
chmod 755 /mnt/opt/privateer/usr/bin/oscam/oscam-svn10666-samsungtv-webif
chmod 755 /mnt/etc/init.d/05_05_Oscam.init

6:Reboot the tv, wait for about 30 seconds and then use your web browser to connect to oscam
(http://<ip address of tv>:8888) and setup your servers.

horatyu wrote:after root:

HOW TO OSCAM

1: unpack it and upload the oscam folder to /mnt/opt/privateer/usr/bin.
2:Copy only the libOscamX_buildXXX.so file containing the letter of your tv series to the newly created /mnt/opt/privateer/usr/bin/oscam folder.
3:To enable the autorun, copy 05_05_Oscam.init to /mnt/etc/init.d/.
4:Download samyGOso_v1.2.5.zip from here and unzip it.
Then copy the file samyGOso from the unzipped folder \samyGOso\out-\ to the tv?s folder /mnt/opt/privateer/usr/bin/.
Make sure you replace the existing one.
5:Add executable attribute with Putty !!!
CODE:
chmod 755 /mnt/opt/privateer/usr/bin/samyGOso
chmod 755 /mnt/opt/privateer/usr/bin/oscam/oscam-svn10666-samsungtv-webif
chmod 755 /mnt/etc/init.d/05_05_Oscam.init

6:Reboot the tv, wait for about 30 seconds and then use your web browser to connect to oscam
(http://<ip address of tv>:8888) and setup your servers.

But with T-MST14DEUC-2781 it crashes on scrambled channel at leat wit tanyasoft oscamapi or are there a newer?

TanjaSoft wrote:fw downgrade is required for series H, with version greater than 2602

Note that despite advice, it was reported to work with 2606 (currently available in libFWdowngrade 1st post...)

ah? on 2781 too?

djcool wrote:

horatyu wrote:after root:

HOW TO OSCAM

2:Copy only the libOscamX_buildXXX.so file containing the letter of your tv series to the newly created /mnt/opt/privateer/usr/bin/oscam folder.

But with T-MST14DEUC-2781 it crashes on scrambled channel at leat wit tanyasoft oscamapi or are there a newer?

do you have libOscam for your tv?

libOscamH_build128.so this is name





48h6400 T-MST14DEUC-2781 Method root is not based skype===> work ok oscam on satelite and dvb-c on scrambled channel

horatyu wrote:after root:

HOW TO OSCAM

1: unpack it and upload the oscam folder to /mnt/opt/privateer/usr/bin.
2:Copy only the libOscamX_buildXXX.so file containing the letter of your tv series to the newly created /mnt/opt/privateer/usr/bin/oscam folder.
3:To enable the autorun, copy 05_05_Oscam.init to /mnt/etc/init.d/.
4:Download samyGOso_v1.2.5.zip from here and unzip it.
Then copy the file samyGOso from the unzipped folder \samyGOso\out-\ to the tv?s folder /mnt/opt/privateer/usr/bin/.
Make sure you replace the existing one.
5:Add executable attribute with Putty !!!
CODE:
chmod 755 /mnt/opt/privateer/usr/bin/samyGOso
chmod 755 /mnt/opt/privateer/usr/bin/oscam/oscam-svn10666-samsungtv-webif
chmod 755 /mnt/etc/init.d/05_05_Oscam.init

6:Reboot the tv, wait for about 30 seconds and then use your web browser to connect to oscam
(http://<ip address of tv>:8888) and setup your servers.

is the encrypted TV-signal also in 30 sec ready?
I have h6470 with V2770 and I am still waiting for a good solution. 180sec are to worst for the startup and i dont want to downgrade the Firmware, because of the highly brick risk