Re: [App] Removing Cinavia on E/F Bluray players
Posted: Mon Aug 10, 2015 4:21 pm
If you don't see Cinavia anymore, it's okaratras wrote:It should be ok?
SamyGO
Samsung TV Firmware on the GO
http://forum.samygo.tv/
[App] Removing Cinavia on E/F Bluray players
Page 19 of 24
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Mon Aug 10, 2015 4:30 pm
OK! Then the problem i have its cause i use a 1tb drive so i must unplug the usb drive whit the Samygo files. I will try to make a partition with fat.
There is no way to make the patch work in NTFS?
There is no way to make the patch work in NTFS?
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Mon Aug 10, 2015 4:34 pm
Yes, just create a small FAT partition with rooting files. No other way.
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Tue Aug 11, 2015 4:13 pm
Actually AFTER rooting he can move SamyGO_data directory to NTFS and it should still workzoelechat wrote:Yes, just create a small FAT partition with rooting files. No other way.
FAT is needed for rooting itself Re: [App] Removing Cinavia on E/F Bluray players
Posted: Fri Aug 21, 2015 9:12 pm
copying files to the temp folder?, I have, BD E6100
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Mon Sep 21, 2015 6:02 am
hello ,can someone confirm that the procedure on the first page does work with bdf5100?
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Tue Sep 22, 2015 9:47 am
Hi! Big thanks to all who have worked on this solution - what an amazing resource! I have a BD E8500 and confirm the patch has removed Cinavia warnings/restrictions from playing backed-up content via Plex.
The most difficult part of the process for me was the crash course in using telnet and ftp from OSX terminal - I am not usually a command-line guy, but this was pretty straight forward once I'd figured how.
Also I am very green to rooting, so it wasn't immediately clear that the patch is supposed to run on the BD via telnet... but there is a lot to read on this forum to help.
A couple of other tips:
- E8500 has two USB ports. Using the rear port, SamyGo app appeared instantly in SmartHub from a hard restart (unplugged). Using the front didn't work
- I could still Telnet to the BD once the web browser app had been closed, but could only FTP when the browser was open and on screen. That wasted a few minutes!
- I had to stipulate specific port for telnet (5023) Not sure if this is normal, but required from terminal
Thanks again!
PS If only there was a patch to stop the DTV tuner breaking!
The most difficult part of the process for me was the crash course in using telnet and ftp from OSX terminal - I am not usually a command-line guy, but this was pretty straight forward once I'd figured how.
Also I am very green to rooting, so it wasn't immediately clear that the patch is supposed to run on the BD via telnet... but there is a lot to read on this forum to help.
A couple of other tips:
- E8500 has two USB ports. Using the rear port, SamyGo app appeared instantly in SmartHub from a hard restart (unplugged). Using the front didn't work
- I could still Telnet to the BD once the web browser app had been closed, but could only FTP when the browser was open and on screen. That wasted a few minutes!
- I had to stipulate specific port for telnet (5023) Not sure if this is normal, but required from terminal
Thanks again!
PS If only there was a patch to stop the DTV tuner breaking!
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Sun Sep 27, 2015 5:56 pm
Works great on my HT-F5500W. Rooted then Cinavia patch and autostart.
Works with all players even Plex.
Just a small info for people connecting with Putty or other for telnet. Port 5023 didn't work for me. Port 23 did the trick and gave me the ability to run the commands and see the output.
With 5023 I only had the following message and commands didn't work (but no output to know it)
/bin/sh: can't access tty; job control turned off.
Cheers
Works with all players even Plex.
Just a small info for people connecting with Putty or other for telnet. Port 5023 didn't work for me. Port 23 did the trick and gave me the ability to run the commands and see the output.
With 5023 I only had the following message and commands didn't work (but no output to know it)
/bin/sh: can't access tty; job control turned off.
Cheers
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Sun Sep 27, 2015 6:01 pm
You should always try 23 first, possible other ones are here "just in case"
Re: [App] Removing Cinavia on E/F Bluray players
Posted: Fri Oct 02, 2015 5:15 pm
Hello. I rooted a bd-e6100 OK but I can't connect via FTP to apply patch. I'm using Filezilla. I tried ports 23 and 1023 but nothing. I have something wrong, sure! Sorry for my english. Anybody can help me please?