Bricked Le40B650 CI+

[atomizasser]

Hello man.
I have a big problem with my TV. i wrote a script for autostart injectso, but i putted too early and i have a bootloop and exeDSP kill my TV.

This is my log when i put exlink cable :

Code: Select all

>> REL  SECURE ONBOOT :: 0x65010326 0x12821282
normal boot [sboot_auth_normalboot:110]
[SERIAL INPUT MANAGE] Managed tty_struct(.name:ttyS1) Setup!!!
[2_64_512_CIP] Linux version 2.6.18_SELP-ARM (youngki_cha@sp) (gcc version 4.2.0
20070514 (GPL2) (SELP 4.2.0-3.0.5.custom 2007-10-31(14:53))) #191 PREEMPT Tue A
pr 21 09:37:48 KST 2009
================================================================================

SAMSUNG: v2.6.18_SELP_3.X_GA_bayhill+/A1(P24)
         (Detailed Information: /sys/selp/vd/lspinfo/summary)

================================================================================

init started:  SELP-BusyBox(GPL2) v1.2.2-Samsung.Common.Linux (2008.12.24-18:59+
0000) multi-call binary
Starting pid 27, console /dev/ttyS1: '/etc/rcS'
/etc/rc.local start!!!!
boot script rc.local start!!!
=====================================================
  ROOTFS VERSION : 1_64_512_CIP-2 T-CHLCIPDEUC
  BOOT VERSION   : 1_64_512_CIP-3
=====================================================

====================================================
             Authuld Version : 1.4 : REL
====================================================
/mtd_rwarea/PartitionSwitch_0_0  is detected...
1st Partition is selected....

----------- Kernel  Loading End------------

Application is started..

Module injector V1.2 for ARM based CPUs.
(copyleft) SmartSmurf 2010 (smartsmurf@shared-files.de)

Info: Import dlopen set at 0x00530898
Info: Import dlsym set at 0x00530d60
Info: Import dlclose set at 0x00530a54
Info: current register set:
R0 =0x40766098 R1 =0x00000000 R2 =0x0000pgd = cb8cc000
0000 R3 =0x4076[00000000] *pgd=6b8f8031, *pte=00000000, *ppte=00000000
6098
R4 =0x407660A0 R5 =0x40022AF8 R6 =0xBEC56C78 R7 =0x407task stack info : pid(64)
stack area (0xbec43000 ~ 0xbec58000)
66098
R8 =0xBEC56E78 R9 =0x00000002 R10=0xBEC56C60 R11=0xBEC56DEC
Starting pid 66, console /dev/ttyS1: '/bin/sh'
-sh: id: not found
# file open error /mtd_tlib/GGame/mac_config_file.mac

Mac check Error in /mtd_tlib/GGame/mac_config_file
Authuld: System will be down.
timeout
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
                        [I'm Kernel] auth failed. System Down.
Kernel panic - not syncing: [I'm kernel] System down

Before tv stop, in # i cannot write anything. i have tried to write "debug" but nothing appears. But when i write "1198282" terminal respond me with ""[SERIAL INPUT MANAGE] serial input ENABLE!!!!!" but after this in # i only can write numbers but all numbers respond me ""# 1
sh: 1: not found"

DO u have any solution for recover my tv?
Thanks!