Page 3 of 4
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Tue Mar 05, 2013 7:04 am
by vuhothang
I can extended SM and enable any option. I was change to region ASIA-ATV -> ASIA-DTV, Local set EA-Viet -> ED-Viet, Tuner type SI-ATC2 -> Sec-TC, but i can using Analog and DVB-T. i want to using DVB-C, can someone tell me how to use TV with DVB-C because my cable provide is Analog and DVB-C (viet nam like euro). the first time i change tunet type to DVB-TCS -> DVB-T2CS with region and local set locked with EA-Viet ASIA-ATV my TV is bricked and SS Support replace new mainboard for me.
Thanks!
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Tue Mar 05, 2013 7:10 am
by juusso
perhaps your tv isn't armed with dvb-c tuner and you can't select it from service menu without to brick tv. no required hardware.
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Tue Mar 05, 2013 7:29 am
by vuhothang
but when i see SS Support replace new mainboard for UA40EH5300 for me, i was capture the mainboard i see tuner is DTTX -51B/C3S BN40-00232B DVB-TC HALF OEM by XuGuang Tech Co., Ltd.
Uploaded with
ImageShack.us
or link
https://docs.google.com/file/d/0BwEip4o ... sp=sharing
can i read spec of this tuner
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Thu Mar 07, 2013 3:27 am
by vuhothang
Now i can using DVB-C, DVB-T, Analog with my TV UA40EH5300 when i changed Region/Localset to PANEURO/EU, my TV became UE46EH5300 (not yet re change to UE40EH5300, no need!!!).
Thanks to wiki samy go and many people in this forum!
Thanks! Thanks! Thanks!
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Sun Jun 23, 2013 4:42 am
by MarocOS
Hello,
Okay no way to activate my network again so i have created a DIY IR Transceiver to activate the desactivated menu on tv!
but this doesn't work what's wrong with my DIY?
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Sun Jun 23, 2013 4:43 am
by MarocOS
Suite of pictures
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Mon Jun 24, 2013 9:09 pm
by propergol
1)First you should take your photos in daytime and not at night like those one... they are extremly blury due to the lack of light.
Anyway, since I can't see your hardware system, we would assume it is correct.
2) You did not mention from what device you are outputing the sound signal....
I assume its a mobile phone.
If so....one solution is to inscrease you mobile device volume to its max, and if it still not works try a different kernel that would allow higher header output.
It did worked in my case.
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Tue Jun 25, 2013 3:29 am
by juusso
use yuor laptop rather than mobile phone to transmit signal. A lot of phones have not enough volume amplification even with max vol set.
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Tue Jun 25, 2013 1:03 pm
by MarocOS
Hi,

Yes Sorry about the pics

see below for it
1 ) - I have used many phones with max volume, no luck!
2 ) - I have used My windows Laptop, no luck!
3 ) - I have used My Linux workstation (increased volume), no luck!
This all are tested before i put the pics here. and btw i have searched on internet for the scheme (many sources) before i sold them in that way.
The problem is i have tested also before i put them here with camera and not blinking (used camera with direct electricity and works).
But in final step i used only one IR Led and it send the commands like a charme

with my linux workstation.
Code: Select all
-------------------
|->| ++ |<-| | LED'S
| |____| | -------------------
|__________| --
+ -
\ /
\ /
\ /
| |
| | -------------------
| | | CABLE 2 WIRES
| | -------------------
||||
| |
---- -------------------
| | | JACK 3.5 mm
---- -------------------
| |
--
Re: Extended SM through ruSamsungTVCommunicator on E series!
Posted: Wed Jun 26, 2013 3:04 pm
by ricci206
Good morning,
but the extended service menu' with rusamsungcommunicator work on firmware 1036 for ue40eh5300p ?
On my tv not working...
Please help me!!!
Thank you