Samsung TV Firmware on the GO
http://forum.samygo.tv/
not correct, if you allready have a patched firm on your device then you can dump the partitions, unsquashfs it check the changes against the original one, modify it in same way repack again and flash your version back...alessio71 wrote:..
So I will never be able to use a newer exeDSP at least that our friend arris69 won't update his patched FW, correct?
wow, sounds quite simple said like that but... I've already played my jolly with warranty and I don't think I'll risk this procedure without having a backdoor access (like the serial console).arris69 wrote:
not correct, if you allready have a patched firm on your device then you can dump the partitions, unsquashfs it check the changes against the original one, modify it in same way repack again and flash your version back...
Code: Select all
./02_04_vusb.init start
mkfs.vfat 2.11 (12 Mar 2005)
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/dummy_hcd.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/mstar/usb/gadget/dummy_hcd.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/gadget/g_file_storage.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/mstar/usb/gadget/g_file_storage.ko': unknown symbol in module, or unknown parameter
cat: can't open '/sys/block/sd?/device/model': No such file or directory
real storage device at: /sys/block/sd?/device/model
Code: Select all
ls /mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules
2.6.24_SELP.4.3.x-Cortex-A8Code: Select all
Linux version 2.6.30.9 (joongyu.sun@sp2) (gcc version 4.4.1 (VDLinux ga-release 2010-06-30) ) #45 PREEMPT Mon Feb 7 20:24:37 KST 2011Have you tried a simple "Factory Reset" procedure?lewy20041 wrote:hello. i desperatly need help. i have bd-d7500 blueray 3d player i changed the dns tu 149.154.159.134 and it found the update B-FIRBP7WWC_001671. i flashed it and now my blueray player isnt working at all samsung smart logo and after that black screan. please hellp
Code: Select all
Reset Your Blu-ray
Power on your Blu-ray player and tune your TV to the input where the Blu-ray player is connected. For example, if the Blu-ray player is connected to HDMI 1 press the TV input/source/line button to tune your TV to HDMI 1.
Remove any disc from the player and then press and hold the Stop button on the front of the player, not the remote, for about 8 seconds or until the front display reads ?SETUP?. 'Resetting all settings to default values...' is displayed on your TV screen as the Blu-ray player powers off and resets.
The Blu-ray player is automatically powered on after the reset and the select Language screen is displayed.
reinstall it...alessio71 wrote:....
Looks like there is something wrong betweeen the actual linux version and the libraries present in the actual SamyGO extensions:Can somebody help me with this?Code: Select all
Linux version 2.6.30.9 (joongyu.sun@sp2) (gcc version 4.4.1 (VDLinux ga-release 2010-06-30) ) #45 PREEMPT Mon Feb 7 20:24:37 KST 2011
Thank you.
Alessio
The firmware or the Extensions? I tried to reinstall the extensions but nothing changed... and the firmware reports that there are no updates available (as I said, before, when I went in the firmware update menu, I had the "real" 1004, now i get the 1671 that's why I don't get any update)arris69 wrote:
reinstall it...
the extensions, now you should have the version with the correct kernel modules...alessio71 wrote:The firmware or the Extensions? I tried to reinstall the extensions but nothing changed... and the firmware reports that there are no updates available (as I said, before, when I went in the firmware update menu, I had the "real" 1004, now i get the 1671 that's why I don't get any update)arris69 wrote:
reinstall it...
Thank you,
Alessio
Code: Select all
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/usb/input/usbhid.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/mtd_down/widgets/user/SamyGOE/SamyGO/lib/modules/2.6.30.9/kernel/drivers/hid/hid.ko': unknown symbol in module, or unknown parameterit didnt helped. isnt there some ran.sh firmware upgrade scrip as this firmware suposed be samygo pachedalessio71 wrote:Have you tried a simple "Factory Reset" procedure?lewy20041 wrote:hello. i desperatly need help. i have bd-d7500 blueray 3d player i changed the dns tu 149.154.159.134 and it found the update B-FIRBP7WWC_001671. i flashed it and now my blueray player isnt working at all samsung smart logo and after that black screan. please hellp
Code: Select all
Reset Your Blu-ray Power on your Blu-ray player and tune your TV to the input where the Blu-ray player is connected. For example, if the Blu-ray player is connected to HDMI 1 press the TV input/source/line button to tune your TV to HDMI 1. Remove any disc from the player and then press and hold the Stop button on the front of the player, not the remote, for about 8 seconds or until the front display reads ?SETUP?. 'Resetting all settings to default values...' is displayed on your TV screen as the Blu-ray player powers off and resets. The Blu-ray player is automatically powered on after the reset and the select Language screen is displayed.