SamyGO

Is there any JTAG connector known in that players? The Firmware needs to be flashed on there anyhow while assembley?
Maybe there is a hidden BootP or some kind of FTP like the Linksys-routers use .. ?!

what is your BD model?

greenhorn wrote:what is your BD model?

I own one of these mini BD D7000 ZF slot in players. More to come, but I will make a descision based on patchabilities

did you try exlink connection? You will only get debug. I am not sure if you can get more from that board.

greenhorn wrote:did you try exlink connection? You will only get debug. I am not sure if you can get more from that board.

From the forum it looks like that will give me some sort of debug-mode, but nowhere I could find something that may give the option to push some firmware into that small bastard .. :/

I will do some testing with some tools, maybe it is possible to get a bootp-signal or some sort of open sockets at a certain point of the bootup.

But that won't happen during the next few month cause I have not much time left ...

hello

I have bd-d7000 with fireware 1014 and I cant downgrade using DNS from this page!!!
A few mounts before I downgrade 1010 to 1004 with any problem.
Whats happen??

Thanks

zbyszek82 wrote:hello

I have bd-d7000 with fireware 1014 and I cant downgrade using DNS from this page!!!
A few mounts before I downgrade 1010 to 1004 with any problem.
Whats happen??

Thanks

1014 does additional checks to the updateserver, so it recognizes samygo servers as false servers and does not accept the upgrades avaiable on them.

and afaik up to this point there seem to be no way around if the only option of updating/patching is via smarthub. You should read up on exlink and debugmodes and prepare to do some more than just punch in a few ip addresses ...

regards
KRAER

Hi guys .....i's there any , any way to downgrade firmware on HT- F5550 (samsung DVD player)
I'l be more then thankful

Thnx to everyone.

KRAER wrote:

zbyszek82 wrote:hello

I have bd-d7000 with fireware 1014 and I cant downgrade using DNS from this page!!!
A few mounts before I downgrade 1010 to 1004 with any problem.
Whats happen??

Thanks

1014 does additional checks to the updateserver, so it recognizes samygo servers as false servers and does not accept the upgrades avaiable on them.

and afaik up to this point there seem to be no way around if the only option of updating/patching is via smarthub. You should read up on exlink and debugmodes and prepare to do some more than just punch in a few ip addresses ...

regards
KRAER

So it is possible to downgrade ?
Could you explain me how?

I have router asus rt-n66u with tomato by shibby

zbyszek82 wrote:

KRAER wrote:

zbyszek82 wrote:hello

I have bd-d7000 with fireware 1014 and I cant downgrade using DNS from this page!!!
A few mounts before I downgrade 1010 to 1004 with any problem.
Whats happen??

Thanks

1014 does additional checks to the updateserver, so it recognizes samygo servers as false servers and does not accept the upgrades avaiable on them.

and afaik up to this point there seem to be no way around if the only option of updating/patching is via smarthub. You should read up on exlink and debugmodes and prepare to do some more than just punch in a few ip addresses ...

regards
KRAER

So it is possible to downgrade ?
Could you explain me how?

I have router asus rt-n66u with tomato by shibby

Well ... Samsung does put firmware on the chips so there is a way ... but nobody knows how at the moment. But if you read and contribute to the forum and do some reasearch with your device we all might be able to get a result, that will function on all devices ...

After the newest Firmwares it is not possible to use DNS Hack!