SamyGO

You don't need to compile anything, every archive already contains binary in out- folder

So yeah, i noticed this... All patches work, so nice job.I would want to make my own patch any resources forward this?

teodorgly wrote:any resources forward this?

No. You have sources as examples, you need IDA and decompiler to reverse your exeDSP, some toolchain and hundreds hours. Done.

Hello!

I have dead UE40D5700 (mainboard paperlabel say UE40D5707 974B, MAIN 1018,1 SUB 1003.

I updated MAIN to 1027 bay USB method and after that remote control not working propely, I cannot stop TV any more by remote.

So I go to service menu and ofcource do many thinks not to allowed and after I start Micom upgrade prosess ( I see wait...) Nothing
happend long time and I have to disconnet power supply (230V). After that TV is totally dead. Red LED is not working when I put power
plug on.

PSU is OK, I disconnect cable from PSU to mainboard and backlight is OK, all voltage are OK. I read many many chains in this forum and
need help to unbrick my TV. I undestand that you are expert with that. I plan to buy following Arduido to chech and maybe unbrick my TV.

I need some detailed help, connection help an so on, pictures are wellcome, I am electrician but these elektronics is not so familiar for me.

http://www.ebay.com/itm/Ethernet-Shield ... 5d371d6fd7

I did not find any shematic for that TV, only PSU shematic founded from Elektrotanya. I do not so what is Micom eeprom but I thing is 8 pins
IC S24CSO near to Weltrend IC. Some picture follows.

Is it time waste to try to reset Micom eeprom or not, what is best plan to go to unbrick tv so I am pleased to in your test team after that.

Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....

steef84 wrote:Just if interrested : I own a UE40D5700 with T-MST5DEUC-1025.0. Willing to test if needed ....

Good, very good Did you try MIPS patches from public forum ?

i also have MST.., i can help if you want me..


My TV: 37UED5700, with firmware T-MST5DEUC-1009.1

mark21 wrote:i also have MST.., i can help if you want me..


My TV: 37UED5700, with firmware T-MST5DEUC-1009.1

Yeah welcome Did you try already released patches ? Please also check ARM D patches if you want some I can port to MST/MIPS

Hi,

i have a UE46D5700. Requires you still Tester ?

BG
Basti

bdwbasti wrote:Hi,

i have a UE46D5700. Requires you still Tester ?

BG
Basti

Of course MST testers are ALWAYS welcomed Did you try patches that we already released in D MIPS section ? That's first thing worth checking. Next check D ARM. Thanks to previous work it is now possible to port (almost) ANY D ARM patch to D MIPS. We just need your feedback what you want ?