Page 22 of 44
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Tue Aug 23, 2011 6:03 pm
by gooseye
juuso wrote:manual is needed to fill up, here are some underwater stones to be noticed.
DWA-160 is being recognized as samsung`s native and doesn`t need to be re-flashed. The same with dwa-140 H/W rev B. (or A? need to check).
So re-flashing (or changing eeprom value) is needed on DWA-125 and 140 H/W rev A (or B..?)
thanks!
I've just bought the DWA-140. H/W Ver is B1 and it works straight out of the box on my C-series with T-VALDEUC-3007.1
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Tue Aug 23, 2011 7:40 pm
by juusso
OK, then it`s rev.A that won`t work
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Fri Sep 02, 2011 9:14 pm
by gooseye
I tried another DWA-140, H/W Ver B2. This one does NOT get recognised as Samsung.
Better to check carefully & get H/W B1. This is printed on the module itself, and on the lower left-hand corner of the box's serial number sticker.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Fri Sep 02, 2011 11:35 pm
by erdem_ua
Could you try to change PID/VID values with e2p flashing on that B2 dongle?
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Thu Sep 08, 2011 1:25 pm
by erdem_ua
AFAIK rt3070sta works with rt2870sta driver.
Also D series TVs just have rt3572 drivers/utils!
So they are compatible hardwares. I believe your problem something differrent.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Sat Sep 10, 2011 6:23 am
by juusso
Alegoria wrote:
Everything seems to go well, but the values don't change.
Yes, seems this dongle is SamyGO resistent...
But i can confirm, that my DWA-125 H/W
A1 F/W ver. 1.10 is ok with this method.