SamyGO

myname70 wrote:thank you Guys! I replaced the samyext4.img file with the new/archived one - and all works fine now. It was strange how can the img be corrupted, but could happens (obviously). Thanks again!

Why "strange"? It's bad word, maybe you meant that it was "expected"? Many words could fit but "strange" just surprised me

sectroyer wrote:

myname70 wrote:thank you Guys! I replaced the samyext4.img file with the new/archived one - and all works fine now. It was strange how can the img be corrupted, but could happens (obviously). Thanks again!

Why "strange"? It's bad word, maybe you meant that it was "expected"? Many words could fit but "strange" just surprised me

Just wondering (and that is why I said - strange) why is expected the img to get corrupted by itself ? Does it mean we should replace the img (overwrite it) preventively on regular basis ? Just to avoid it get corrupted again?

You should monitor sam.log size or apply little fix linked by wluczykijwf above. Not impossible that img got corrupted because it was "full of log"

Today, the problems started. TV UE46F6650ABXUA firm. 2107 began to reboot a minute after power-up. If a USB stick with SamyGO removed , it is operating normally . Transfer all the data on the flash drive and the other to a different USB port - the problem remained. SamyGO starts , but a minute later the TV is overloaded . What could it be?

Try to delete logs. Look at the size of the logs at /mnt/sam.log and /mnt/samygo.log

removed logs

It works?

TV stopped reading the USB stick

Then try change usb stick for another and you can also try to replace samyext4.img with new one and setup everything from 0.

Tried 4 different USB drive. I update the firmware to the latest version 2116. Updated Smart Hub. I did all discharges. Root get one minute, and then reboot, TV reboots in a minute if you have a flash drive. I think the problem is not in the flash drive, and on TV, as the network and have the same problem if you try to go to the computer in a folder.