Page 23 of 44
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Thu Jul 04, 2013 4:09 am
by iDeep
Suddenly my SamyGo install was not working so I resetted SmartHub.
However, the widget is not getting loaded for installation (not shown in SmartHUb for Installation) from USB. Ihad tried formatting to FAT32 and rebooting TV several times and reinstalling Skype. Any ideas why that could be the case ?
UPDATE : Oops, my bad. The USB had all files extracted to the root instead of a folder. Working now
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Jul 07, 2013 3:53 pm
by mmhorda
Here is a small present for those who has firmware T-MST10PDEUC <= 1030.0. (might work on higher firmware versions too)
A way to make Autostart and SKYPE working together.
1. Follow instruction on the first page!
after all is working we can continue...
1. login to TV via telnet
2. modify /mtd_rwcommon/widgets/user/SamyGO/data/run.sh
you need to hash these lines.
#cp /mtd_rwcommon/widgets/user/SamyGO/data/libSkype.so /mtd_rwcommon/moip/engines/Skype/libSkype.so
#cat <<EOF>/mtd_rwcommon/moip/engines/Skype/AutoStart
#EOF
3. modify /mtd_rwcommon/widgets/user/SamyGO/config.xml
you need to change ticker settings
change <ticker>n</ticker> to <ticker>y</ticker>
4. Delete Skype.
5. Restart TV.
6. Press SmartHub , Tools and navigate to --> Settings --> Service Manager --> Autoticker -- SamyGO-E
7. Install Skype
8. Restart TV again and enjoy
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Mon Jul 08, 2013 11:56 am
by fluffi444
Nice Idea, mmhorda!
Question is now if that way works on every Samy?
Or better which models are able to Autostart Appz with Autoticker...
6. Press SmartHub , Tools and navigate to --> Settings --> Service Manager --> Autoticker -- SamyGO-E
Will test this on mine later today....
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Tue Jul 09, 2013 10:53 pm
by fluffi444
Works!! But now we have this EXIT confirmation after SamyGO installtion with every start... Not very disturbing but there must be a way to deactivate it...
Tried to find it by myself but no success up to now... Have to take a closer look on it....
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Wed Jul 10, 2013 12:23 pm
by zoelechat
fluffi444 wrote:Works!! But now we have this EXIT confirmation after SamyGO installtion with every start... Not very disturbing but there must be a way to deactivate it...
Tried to find it by myself but no success up to now... Have to take a closer look on it....
I did not test because I'm not interested in Skype, maybe you can try to edit SamyGO/index.html and remove these lines:
Code: Select all
<div id="welcome">
SamyGO Installed! Press return to exit.
</div>
<a href="javascript:void(0);" id="anchor" onkeydown="Main.keyDown();"></a>
Confirmation will be gone but I just wonder if widget will accordingly exit itself (does it need to?)
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sat Aug 03, 2013 2:11 pm
by Mirex85
Hi guys
I do everything whit the instruktions but when i install samygo on my tv es6800 (firm. 1037) and rebooting the tv, and after that try to launch samygo, only appears this " samygo installed. press return to exit" and nothing else.
Somebody some solution?
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Aug 04, 2013 4:27 am
by iDeep
Mirex85 wrote:Hi guys
I do everything whit the instruktions but when i install samygo on my tv es6800 (firm. 1037) and rebooting the tv, and after that try to launch samygo, only appears this " samygo installed. press return to exit" and nothing else.
Somebody some solution?
Keep repeating the process, it took me quite a few retries to get it working. Make sure :
1). You have the correct folder structure, SamGo extracted to root of usb not a folder.
2). Use an static IP.
3). Be patient and wait for SamyGo to pop-up on restart.
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Aug 04, 2013 10:29 am
by zoelechat
I recently had to install SamyGo again from the beginning (after testing autoticker method which did not work and scratched all
)
One step is missing for me: launch Skype once just after installing it.
The hack did not work until I've done it (otherwise some useful dir/files are not created -> /mtd_rwcommon/moip/engines/Skype)
Hope this helps...
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Aug 04, 2013 11:42 am
by Mirex85
Keep repeating the process, it took me quite a few retries to get it working. Make sure :
1). You have the correct folder structure, SamGo extracted to root of usb not a folder.
2). Use an static IP.
3). Be patient and wait for SamyGo to pop-up on restart.[/quote]
1. yes correct folder structure
2. i have pc and tv connectedd wireless to the same network, router gives dynamic ip, i cant changed this
3. so you telling me to do that endless time and one time will work, i think that the new firmware meaby the problem (1037)
Ok i try and try to launch skype after installing sammygo
Re: [Testing] Update2: E series widget -autostart w/o USB
Posted: Sun Aug 04, 2013 12:11 pm
by zoelechat
Mirex85 wrote:Ok i try and try to launch skype after installing sammygo
You have to launch Skype
once just after installing it and
before SamyGo install