SamyGO

gaffel72 wrote: + /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sda1/SamyGO/samyext4.img
+ /tmp/bin/busybox mount -o sync,exec /tmp/loopnone /mnt
mount: mounting /tmp/loopnone on /mnt failed: Input/output error
+ /tmp/bin/busybox --install -s /mnt/bin

I wonder what it might be... "Input/output error"... hmm... maybe SAME as everybody else !!! Faulty usb stick. Try another one (no need to reroot). Some users reported success after attaching another usb and using it for PVR

zoelechat wrote:[App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support

0.3.5 only, I don't think 0.3.6 had been released

Hello,

Here is log file - In second line there is error - why?
What I dd wrong?

Something must be wrong in your libRCremap.config, could you attach it?
Seeing log I think remapping is done anyway, despite error.

Did you follow advice?

zoelechat wrote:Use Notepad++ and set linefeeds to UNIX format to edit file, not Windows Notepad!!!

zoelechat wrote:Something must be wrong in your libRCremap.config, could you attach it?
Seeing log I think remapping is done anyway, despite error.

Here is config file - Unfortunatelly remap procedure doesn't help - still this sam problem with power off TV.
What I did:
1. in telnet executed command: ./samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mnt/opt/privateer/usr/libso/libRCremap.so -r
2. reboot TV
Is it enought?
Should I swith ON script 99_99_RCremap?
Where is the failure?

Thank you.

spiderjuka wrote: Here is config file

Seems good

Unfortunatelly remap procedure doesn't help - still this sam problem with power off TV.
What I did:
1. in telnet executed command: ./samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mnt/opt/privateer/usr/libso/libRCremap.so -r
2. reboot TV
Is it enought?

Once you reboot TV, remapping is gone, you need to try without rebooting, just after samyGOso command
But you have to reboot TV between each RCremap injection (e.g. if you changed .config)

Should I swith ON script 99_99_RCremap?

Not until you find something that works and want it to autostart

Where is the failure?

You may try to remap a more obvious key, such as KEY_1 to see if pressing 1 on remote powers off TV.

@sectroyer
Are you sure v0.3.5 works on H? (just asking because release date is before H went out )

zoelechat wrote:

spiderjuka wrote: Here is config file

Seems good

Unfortunatelly remap procedure doesn't help - still this sam problem with power off TV.
What I did:
1. in telnet executed command: ./samyGOso -p $(pidof exeTV || pidof exeDSP) -l /mnt/opt/privateer/usr/libso/libRCremap.so -r
2. reboot TV
Is it enought?

Once you reboot TV, remapping is gone, you need to try without rebooting, just after samyGOso command
But you have to reboot TV between each RCremap injection (e.g. if you changed .config)

Should I swith ON script 99_99_RCremap?

Not until you find something that works and want it to autostart

Where is the failure?

You may try to remap a more obvious key, such as KEY_1 to see if pressing 1 on remote powers off TV.

@sectroyer
Are you sure v0.3.5 works on H? (just asking because release date is before H went out )

Here you have RCremap.log - 3 keys was remaped - unfortunatelly still doesn't work.
At last line still si error?
What else can I do?

spiderjuka wrote:What else can I do?

Probably wait for sectroyer to release 0.3.6
Obviously 0.3.5 doesn't work on H

zoelechat wrote:

spiderjuka wrote:What else can I do?

Probably wait for sectroyer to release 0.3.6
Obviously 0.3.5 doesn't work on H

Nope his problem is that his config is wrong It's not the problem with the lib. He should check it online or something

zoelechat wrote:

spiderjuka wrote:What else can I do?

Probably wait for sectroyer to release 0.3.6
Obviously this one doesn't work on H

Ok - thank you very much for your time.
Last question regarding to my H7000 TV.
I don't understund sectroyer why problem which I have is caused by my TV only?
What is difference between my H7000 and others?
I think that others also should be affected???

You might also get latest samyGOso and retry: viewtopic.php?f=63&t=6186&start=20#p63737