SamyGO

same as changing the first time change the codes to the originals
sorry linking is not allowed for me Your post looks too spamy for a new user, please remove off-site URLs.
search on linuxwireless organisation for usb devices
Daniel

Can anyone confirm that the Belkin F5D9050 G+ dongle works with the C series tvs?

Thanks.

I just changed the d link dwa-140 rev B2 f/w ver 1.71 (Bus 001 Device 004: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT2870])

flashing eeprom is ok

used 2011 driver
test it tonight in bdc-5500 bluray player

quoted code from luca

Code: Select all

root@HP-d530:~# iwpriv ra0 e2p 0208=0x04E8
ra0       e2p:0208=0x04E8
root@HP-d530:~# iwpriv ra0 e2p 020A=0x2018
ra0       e2p:020A=0x2018
root@HP-d530:~# iwpriv ra0 e2p 0208
ra0       e2p:
[0x0208]:0x07D1
root@HP-d530:~# iwpriv ra0 e2p 020a
ra0       e2p:
[0x020A]:0x3C0A

code I used to change pid / vid find the difference
I think the b2 version doesn`t like the full hex if you program.

@ luca can you try aggain using the code I used to confirm if the b2 version is working or not. If not there are different firmwares on the b2
thanks
Daniel

tried the dlink dwa-140 rev b2 in my blu ray player.
it recognises the adapter, got a accurate mac address but cant` find any networks. putting in manual network doesn`t work either.
will try tonight to set up an open access point to avoid security issues.

the sitecom wl608 v1 is deffinitely a NO go cannot change the pid / vid

keep you informed

Daniel