SamyGO

Yeah looks like lack of newline... Always after last entry... It's bad to not end line "nicely"

zoelechat wrote:

sectroyer wrote:Moreover I use the same on my H:

Code: Select all

SamyGO RCremap v0.3.5 log - (c) bugficks 2013

So don't tell me it doesn't work and need fixing

Ok, at least we're sure about that
Just wondered because you talked about 0.3.6 as latest

Hello.
OK I was found key responsible for POWER OFF.
It is BD_KEY_POWER.
I remaped it to CMD:/sbin/micom shutdown - it works !!!! But conditionally.
I noticed that in config file first line must not be remaped to CMD - strange.
When in first line is key remaped to CMD finally after execustion in log file you can find error config file (remap procedure failure)
When in first line is any other remap key, for example "KEY_01": "KEY_02" - everythink works.
Here you can find two examples - , Last two questions:
1. Why key BD_KEY_POWER dosen't works normaly?
2. Now if I want to set pernamently key BD_KEY_POWER to CMD:/sbin/micom shutdown - Should I only switch ON script 99_99_RCremap.init?
Or should I do more things?

Thank you fo support.

papabong wrote:Hello

I have tried the H-Root on a UE65HU8590 on Firmware Version 1190. OTA has been switched off and everything has been set up as required (skype, ...)

The Rooting process with the SamyGo Widget runs without any errors - however it looks like its not working. Check out the screenshots attached.

I cant connect via telnet or ftp. Also skype still works ...

I hope anyone can help me !

cheers and a happy new year !

papa

Godd Morning Everyone,

after disconnecting the power from the tv and starting afterwards it seems that "something" happend. Skype is not working anymore (shows the loading screen).
However Im still not able to connect via telnet and/or ftp.

cheers

papa

spiderjuka wrote:

SpoilerShow

zoelechat wrote:

sectroyer wrote:Moreover I use the same on my H:

Code: Select all

SamyGO RCremap v0.3.5 log - (c) bugficks 2013

So don't tell me it doesn't work and need fixing

Ok, at least we're sure about that
Just wondered because you talked about 0.3.6 as latest

Hello.
OK I was found key responsible for POWER OFF.
It is BD_KEY_POWER.
I remaped it to CMD:/sbin/micom shutdown - it works !!!! But conditionally.
I noticed that in config file first line must not be remaped to CMD - strange.
When in first line is key remaped to CMD finally after execustion in log file you can find error config file (remap procedure failure)
When in first line is any other remap key, for example "KEY_01": "KEY_02" - everythink works.
Here you can find two examples -

log_error.zip

,

log_ok.zip

Last two questions:
1. Why key BD_KEY_POWER dosen't works normaly?
2. Now if I want to set pernamently key BD_KEY_POWER to CMD:/sbin/micom shutdown - Should I only switch ON script 99_99_RCremap.init?
Or should I do more things?

Thank you fo support.

Interesting finds/bug, glad it finally works.
Yes, copy 99_99_RCremap.init to /mnt/etc/init.d, chmod +x, should be enough for autostart.

Quick Note: Root on UE40H6470 with firmware 2130 is working here

zoelechat wrote:@ALL those who rooted successfully

Could you please provide FULL TV model and FULL firmware name/version. Thanks

Hello.
success
TV model UE50H5570. Firmware: T-MST14DEUC-2115.3

zoelechat wrote:Interesting finds/bug, glad it finally works.
Yes, copy 99_99_RCremap.init to /mnt/etc/init.d, chmod +x, should be enough for autostart.

Hello,
Works - thank you.
Now I can say that SamyGO is fully installed and worked for my H7000 TV.
ps. command micom shutdown has one negative point for TV: Anynet+ dosent work between TV and satellite decoder.
What about key BD_KEY_POWER? Do you know why it dosen't works normaly?
Is it possible to update or change something inside samyGO to fix this problem?
It is for sure last my questions.

spiderjuka wrote:ps. command micom shutdown has one negative point for TV: Anynet+ dosent work between TV and satellite decoder.

I told you: it's brutal shutdown, not soft one

spiderjuka wrote:What about key BD_KEY_POWER? Do you know why it dosen't works normaly?

I think sectroyer already answered several times: router/USB/blah

zoelechat wrote:

spiderjuka wrote:ps. command micom shutdown has one negative point for TV: Anynet+ dosent work between TV and satellite decoder.

I told you: it's brutal shutdown, not soft one

spiderjuka wrote:What about key BD_KEY_POWER? Do you know why it dosen't works normaly?

I think sectroyer already answered several times: router/USB/blah

Understund

spiderjuka wrote: What about key BD_KEY_POWER? Do you know why it dosen't works normaly?
Is it possible to update or change something inside samyGO to fix this problem?
It is for sure last my questions.

yeah now you should read samyGOrc thread