SamyGO

zoelechat wrote:

aleksuss wrote:How to disable OTN Support on F7000 ? Thanks.

Follow the big red link in sectroyer's signature

f*** I can't make it bigger What else can I do? Make it blink?

I did not understand how it should be composed of the root of the usb fat!
rar which I download and how do I set the usb
not -msts series f
if someone is so 'kind enough to give help I would be very grateful
"I read the thread" but I've confusion

this is metod?
from the folder samyGO take samyext4.img and put into the data folder, and put the folder in usb.
for non-mst, also put the folder SamyGO-F-SM-Autostart in the root usb.
so you have 2 folders in root usb?
and 'correct?
thanks for your patience

2.2 For F-series. You have to enable the extended service menu. There only 3 possibilities:
IR Blaster from the TV [1]
or IR device such Nokia or Samsung
or even build a IR transmitter [2]
3. Have to send FACTORY+3SPEED to the TV.
4. Then have to locate the OTN Support (Service Menu -> "Control" -> "MRT Option" -> "OTN Support" -> Off) to avoid future firmware updates.
5. Power off TV.

-f7000 in my series, I can not find the menu 'to remove automatic updates' menu' of service "
on wiki, there are 3 possibilities', I own a samsung s4, o ir bluster
I could run with that?
but I have not figured out how to connect and access the menu 'of service
Can you help me please?
thank you all for your patience " 3. Have to send FACTORY+3SPEED to the TV."??

If you (like me) have no IR-blaster, and cannot be bothered getting one,
you might "simply" setup a rule in your router ... Something like :
My TV is configured as DHCP client with prefered address of 20.0.0.50

This should also keep nasty updates away

I bluster friend
I wanted to understand if the procedure to be followed and 'this:
1- put in play list file "+ factori 2speed"
2-connect the bluster on my pc "headphones"
3-boot menu on tv
4- boot file from PC player?
it'correct?

Tommino81 wrote:I bluster friend
I wanted to understand if the procedure to be followed and 'this:
1- put in play list file "+ factori 2speed"
2-connect the bluster on my pc "headphones"
3-boot menu on tv
4- boot file from PC player?
it'correct?

That's it. Before accessing service menu, you may check if your IR blaster already works by trying to send "standard" keys (such as INFO.wav). One more advise is to use separate FACTORY.wav and 3SPEED.wav (it seems FACTORY+3SPEED.wav doesn't fit all TVs, just try and you'll know)

F7000 series
for me 'worked well':
1-lit tv with info-menu'-mute-power
2-ir connected to pc
3-initiated file factory + 3speed "tv white 1 sec"
then in the menu 'I found the Vove as in picture and put OF
correct way '? I can be sure?

https://www.dropbox.com/s/ilruqudzapakm ... 7.jpg?dl=0

Tommino81 wrote:F7000 series
for me 'worked well':
1-lit tv with info-menu'-mute-power
2-ir connected to pc
3-initiated file factory + 3speed "tv white 1 sec"
then in the menu 'I found the Vove as in picture and put OF
correct way '? I can be sure?

https://www.dropbox.com/s/ilruqudzapakm ... 7.jpg?dl=0

Yes, it's done

no not 'just did it, because as soon as I plug the usb "formatted in fat"
I do not samygo appears, but only detected device in smart hub app ??
could you help me?
thanks, you're very kind

Read previous posts. You have to open "more apps", etc.

thanks friend, I read almost the entire thread, I now have root
I just had to start smart hub, and go 'applications, and them' samyGO, I started, 2 times and then put autostart
Now I root, I just have to study well, do I need "type decript and records"
and more .....
thanks to all, and sorry if I crushed questions