Page 4 of 18
Re: Rollback on old FW...
Posted: Sun Apr 04, 2010 3:14 pm
by erdem_ua
edelfalke wrote:It doesn't work for CI+ Device.
I have tested this howto on my UE40B7090 CI+ and my TV shoots down after 1-2 minutes and this at every start.
It was a very stressful Weekend to revert my tv back to 3001 FW.
It's "authld", signature checking daemon that check your exe.img and found that it's hacked. You needed to patch your FW with TV's firmware flash GUI. That will fix the problem. But I don't know if you have enough time for that.
Re: Rollback on old FW...
Posted: Mon Apr 05, 2010 3:12 pm
by edelfalke
The time before tv shuts down is definetly not enought (approx. 1 to 2 minutes).
TV shuts down before the usb key with FW is accepted in FW flash menu.
I don't want to brick my tv whether i start the flash and tv shuts down while flashing.
Re: Rollback on old FW...
Posted: Mon Apr 05, 2010 10:24 pm
by erdem_ua
If such a thing happens, It will be %100 percent Samsungs fault.
I think we could modify RSA Disable tool to Authld Disable tool that resolves such problems...
Re: Rollback on old FW...
Posted: Wed Apr 07, 2010 8:20 pm
by aquadran
antrabe wrote:I have le40b651T3W i had updated the firm by mistake to 3000 , then i activated telnet copyng the samygo folder in memory with the game. i can connect to telnet.
After that i tried to back firmware 2005 i follow all the steps with phytopn xor appdatimgenc and exeimgenc, then follow all the steps but dont happens nothing mi df its the same than in example
Filesystem Size Used Available Use% Mounted on
/dev/tbml6 3.1M 3.1M 0 100% /
none 10.0M 0 10.0M 0% /dtv
/dev/tbml7 896.0k 896.0k 0 100% /mtd_boot
none 10.0M 0 10.0M 0% /mtd_ram
/dev/stl0/14 11.0M 1.7M 9.2M 16% /mtd_rwarea
/dev/tbml8 60.0M 51.0M 8.9M 85% /mtd_
/dev/tbml9 28.6M 28.6M 0 100% /mtd_appdata
/dev/stl0/13 189.0M 179.5M 9.5M 95% /mtd_tlib
/dev/stl0/15 50.0M 2.0M 48.0M 4% /mtd_contents
/dev/stl0/16 87.9M 16.5M 71.4M 19% /mtd_down
/dev/stl0/12 149.0M 224.0k 148.8M 0% /mtd_wiselink
/dev/stl0/17 87.0M 176.0k 86.8M 0% /mtd_swu
then what im doing wrong?
When i write the last command i have to wait some time?
I found new firmware don't accept old not encrypted firmware. So you need do that manually from telnet only.
Re: Rollback on old FW...
Posted: Mon Apr 12, 2010 8:46 am
by edelfalke
erdem_ua wrote:If such a thing happens, It will be %100 percent Samsungs fault.
I think we could modify RSA Disable tool to Authld Disable tool that resolves such problems...
@Erdem
could you create the Authld Disable tool for testing?
thanks
Re: Rollback on old FW...
Posted: Mon Apr 12, 2010 9:57 pm
by erdem_ua
No, Needed to inspect CI+ Linux image.
I think mprotect could easily make this. But I don't inspect CI+ kernel before and don't have an Idea if I can. Also I have a no time for such a thing this days.