Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Thu Jan 19, 2012 8:40 pm
I don't think it is possible. On my linux box was not able to do that.
SamyGO
Samsung TV Firmware on the GO
http://forum.samygo.tv/
[How-To] Alternatives of Samsung WiFi Link Stick
Page 35 of 44
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Thu Jan 19, 2012 8:50 pm
Here is the content library game for unofficial@l wifi dongles. Check wiki.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Sun Jan 22, 2012 12:49 am
Hello world 
Thank you for this great forum,
I have a Samsung C530 and with the service mode menu hack I could change to model C550 to activate "allshare". My intention is to use a Dlink DWL-G122 HW Ver: C1 FW 3.0 that I had lying around for the tv. In ubuntu card works out of the box as it loads automatically the module rt73usb when I connect it. I did the iwpriv command without success (I didn't see a change with lsusb after entering the command and also, the message was "no private ioctls." after each command).
Anyway I want to compile the driver again to check if it works with manual compiling driver. I unloaded it with rmmod and I followed the instructions of samygo to compile the driver, but I have the following problem:
I can't continue. How can I fix this?
Thank you for this great forum,I have a Samsung C530 and with the service mode menu hack I could change to model C550 to activate "allshare". My intention is to use a Dlink DWL-G122 HW Ver: C1 FW 3.0 that I had lying around for the tv. In ubuntu card works out of the box as it loads automatically the module rt73usb when I connect it. I did the iwpriv command without success (I didn't see a change with lsusb after entering the command and also, the message was "no private ioctls." after each command).
Anyway I want to compile the driver again to check if it works with manual compiling driver. I unloaded it with rmmod and I followed the instructions of samygo to compile the driver, but I have the following problem:
Code: Select all
cotarelo@laptop:~/Downloads/rt73-k2wrlz-3.0.3/Module$ sudo make
make[1]: Entering directory `/usr/src/linux-headers-3.0.0-14-generic-pae'
Building modules, stage 2.
MODPOST 0 modules
make[1]: Leaving directory `/usr/src/linux-headers-3.0.0-14-generic-pae'
rt73.ko failed to build!
make: *** [module] Error 1
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Sun Jan 22, 2012 12:25 pm
What do you mean? On wiki are wrong models 4ex. d-links. IMHO only compatible device still available is ew-7718un.juuso wrote:Here is the content library game for unofficial@l wifi dongles. Check wiki.
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Sun Jan 22, 2012 7:29 pm
Please give me some hint.
After reading all post of the thread. I discovered that the DLINK DWL G-122 does not work properly after modifying VID/PID. However I'd like to try and contribute even if it bricks my dongle.
I also would like to ask if I can telnet to TV by console, I can upload modules and load them on tv so that finally the dongle works.
Thank you in advance
After reading all post of the thread. I discovered that the DLINK DWL G-122 does not work properly after modifying VID/PID. However I'd like to try and contribute even if it bricks my dongle.
I also would like to ask if I can telnet to TV by console, I can upload modules and load them on tv so that finally the dongle works.
Thank you in advance
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Wed Jan 25, 2012 6:50 pm
Ordered the ew usb pen, will let you know if it works on bdc5500
Prob in on friday.
due to a babyroom to finish and my mcitp examns (yeah yeah i know it is windows :p) I dont have much time to spent on it.
Daniel
Prob in on friday.
due to a babyroom to finish and my mcitp examns (yeah yeah i know it is windows :p) I dont have much time to spent on it.
Daniel
Re: [How-To] Alternatives of Samsung WiFi Link Stick
Posted: Wed Jan 25, 2012 8:39 pm
EW-7718UN i commonly known in Poland as working even on old firmwares without pid&vid change. I personaly tested ew-7718un and confirm that it works - this is RT2870. Edimax EW-7711UAn is rt3070 and i can state that my tv even after pid&vid change does not find any networks when i use card with this chip - i tested it on my own, and other users of this forum state that it does not work too.
EDIT:
OOOOOOOOOOOOOOppppsss: My dlink revision was RT5370 not RT3070 (like a1, a2). So maybe it will work. How ever ew-711UAn is doble price like ew-7718Un. And it is only Nlite so it is useless if you are going to stream large files with high bitrate.
EDIT:
OOOOOOOOOOOOOOppppsss: My dlink revision was RT5370 not RT3070 (like a1, a2). So maybe it will work. How ever ew-711UAn is doble price like ew-7718Un. And it is only Nlite so it is useless if you are going to stream large files with high bitrate.