Page 38 of 44
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 9:11 pm
by zoelechat
That's it, one is zip, other is exe, in both cases extract them to USB.
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 9:24 pm
by Pimboli
Ok. Thx. One last question:
Do i have to notice what i have configured in the menu? (Video / Audio Configuration Settings etc?)
Or are my Settings still there with the Firmware changes?
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 9:31 pm
by zoelechat
Settings should be kept (normally
)
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 9:36 pm
by Pimboli
Ok.
I?ve tested with 000.....when everything goes on so, i pull the tv from the wall and jump on it the whole night...
The Tv says in German: keine aktualis.dat gefunden. (Maybe in english: no aktualis.dat found.
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 10:00 pm
by zoelechat
Just follow instructions:
witgit wrote:Unrar file and copy folder image to pendrive and install.
Voila
If it doesn't work, no idea what's wrong.
Re: E series widget -autostart w/o USB
Posted: Fri Oct 31, 2014 10:06 pm
by Pimboli
shit....but thx
The newest Firmware 2014.2 is accepted to install, but any other Firmware that i extract to usb is ignored...
The File amount and names are the same by the firmwares...
Re: E series widget -autostart w/o USB
Posted: Mon Nov 03, 2014 8:42 am
by miazza
Pimboli wrote:shit....but thx
The newest Firmware 2014.2 is accepted to install, but any other Firmware that i extract to usb is ignored...
The File amount and names are the same by the firmwares...
I guess you have not well extracted the 0000 FW.
It shall be in the root of the USB Stick (it shall be FAT formatted).
Post the tree of the root USB Stick.
Re: E series widget -autostart w/o USB
Posted: Tue Nov 04, 2014 1:27 pm
by Pimboli
My Problem was solved with Firmware 2009 (The Reset of Smart Hub was the thing) , so i decided to not do an downgrade.
I?ve tested Firmware Updates/donwgrades in severeal ways.
At last, i?ve downloaded an original Firmware, extract it to root of stick an try. Now the Sammy does recognize the Update and will make it.
Then i deleted only the files in the Directory structure of the stick, and put also only the files from the 000 Firmware in to it....No way, The Tv find nothing...
My Stick was always Fat32 formated.
Re: E series widget -autostart w/o USB
Posted: Tue Nov 04, 2014 3:57 pm
by sectroyer
Pimboli wrote:My Problem was solved with Firmware 2009 (The Reset of Smart Hub was the thing) , so i decided to not do an downgrade.
I?ve tested Firmware Updates/donwgrades in severeal ways.
At last, i?ve downloaded an original Firmware, extract it to root of stick an try. Now the Sammy does recognize the Update and will make it.
Then i deleted only the files in the Directory structure of the stick, and put also only the files from the 000 Firmware in to it....No way, The Tv find nothing...
My Stick was always Fat32 formated.
Remember to disable OTN Support in extended service menu
Re: E series widget -autostart w/o USB
Posted: Wed Nov 12, 2014 2:39 pm
by Pimboli
Thx for Reminding, but it?s already done
But thats not the only Problem, the Smarthub Updates makes also Problems, but i don?t find a way to disable that....