Page 40 of 113
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 12:55 pm
by Lordbyte
zoelechat wrote:There's a way to turn around the problem:
-Set "ts_outext": ".srf" in libPVRtoTS.config and path to decoded files ("ts_outdir"<>CONTENTS if you don't want original encrypted files to be overwritten)
-Enable Samba Server script on TV and mount PVRtoTS path above as network drive in Windows.
-In PVRdecoder, set this network drive as working AND output folder, make sure "Ask for confirmation when deleting temp files" option is checked.
-Create a false drmdecrypt.exe using args 2 and 4 which does not decode but only rename files (=rename $2 $4). Use it as "alternative payload". (I created one and I can attach it)
-Select your files to be renamed and launch "decode"
-Each time PVRdecoder will ask to overwrite .SRF file, answer no. Recording will be only renamed, with every special chars.
Tested and approved, it works!
Geek alert !
Reading up on stuff .. Will my Indy FTP-component support UTF-8, it surely should do so too .. This is the stuff service releases are made from
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 3:13 pm
by Gizmolino69
Many thanks for that superb little Program!!! It's the only way that works on my ES5800 to decrypt pvr.
And... (You can believe me) i tried a lot other ways...
So thanks again
Best Regards
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 3:16 pm
by marius2du
The only think what keeps me not to change Samsung with Panasonic is this decryption tool. Thanks for this amazing program Lordbyte!
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 4:58 pm
by Attaca
Hello!
I use the "SamyGO PVR decoder", my FTP speed is very low, 10-15 Mbit/s, also the decoding is very long time. I would like the decrypting in my PC.
The film is in my computer ("20140210210002.srf"). How can I do it? I found the "Extract all keys to folder" option, also the key file is in my computer ("20140210210002.key"), but I don't know, how can I decrypting?
Can you help me?
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 6:21 pm
by Attaca
OK, I find the Destroi software, it works fine for me.
But I have no voice in some recordings (with the "SamyGO PVR decoder" too). What is the problem?
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 9:48 pm
by mihd
zoelechat wrote:There's a way to turn around the problem:
-Set "ts_outext": ".srf" in libPVRtoTS.config and path to decoded files ("ts_outdir"<>CONTENTS if you don't want original encrypted files to be overwritten)
-Enable Samba Server script on TV and mount PVRtoTS path above as network drive in Windows.
-In PVRdecoder, set this network drive as working AND output folder, make sure "Ask for confirmation when deleting temp files" option is checked.
-Create a false drmdecrypt.exe using args 2 and 4 which does not decode but only rename files (=rename $2 $4). Use it as "alternative payload". (I created one and I can attach it)
-Select your files to be renamed and launch "decode"
-Each time PVRdecoder will ask to overwrite .SRF file, answer no. Recording will be only renamed, with every special chars.
Tested and approved, it works!
And it's your decision? I do not like .. I think that many are not satisfied ..
Please tell me what happens when select "Rename .ts filenames on USB" ? What commands ? Where does the information about ChName and RecName? In what file ?
I want to try to make the script itself .. Possibly using a third-party FTP client with UTF-8 support ..
Your decision does not suit me.
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 10:28 pm
by zoelechat
Forget it, a new release will be out soon, supporting UTF-8...
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 10:37 pm
by mihd
zoelechat wrote:Forget it, a new release will be out soon, supporting UTF-8...
Thank you! This is very good news!
Autostart will also?
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Tue Feb 11, 2014 11:16 pm
by zoelechat
mihd wrote:Thank you! This is very good news!
Thanks Lordbyte
Autostart will also?
You mean PVRtoTS autostart? This is not related to PVRdecoder but SamyGO extensions, and you can already enable it by yourself.
-libPVRtoTS.so is located in /mtd_rwcommon
-startup scripts are in /mnt/etc/init.d
-take example on existing scripts and other modules installation in [F Software] forum (e.g. ChannelInfo, it works exactly the same way)
-do manual tries before installing definitely your script
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.3
Posted: Wed Feb 12, 2014 1:10 am
by mihd
zoelechat wrote:
You mean PVRtoTS autostart? This is not related to PVRdecoder but SamyGO extensions, and you can already enable it by yourself.
-libPVRtoTS.so is located in /mtd_rwcommon
-startup scripts are in /mnt/etc/init.d
-take example on existing scripts and other modules installation in [F Software] forum (e.g. ChannelInfo, it works exactly the same way)
-do manual tries before installing definitely your script
It's just great!!!
Configured autostart PVRtoTS, as 'ts_outdir' pointed a folder on the router.
Now I can view recordings on any device connected to the router!!!! For me it is important, since my TV receiver on the second TV works only as NFS client and Samygo has not NFS server (Why? I did not respond in any forum).
It remains to wait solve problems with UTF-8 ..
If more and automatic renaming will work, it will be just super .. Probably too much to ask