PVR on C-Series TV with Firmware 3009.2!

[erdem_ua]

AFAIK, it's just an software problem. VAL6DEUC's doesn't have required PVR code in it. I think if you really want, you can copy required functions from valdeuc and could implement PVR for VAL6DEUCs. But doing such a job far more harder than saying...

[erdem_ua]

Nop, there is some changes on HW and probably VALDEUC will not work on VAL6DEUC hardware. Some one might try to do it with Boot VALDEUC firmware with USB boot but I have no hope for such way...

[tempinbox]

Hi all,
Whit ruSamsungTvCommunicator, can I hack service menu of a UE40C6000RP or I must have internet@tv activated?

Instead, when I connect my pc at tv, I receive this error: TCPConnect fehlgeschlagen
Extended error: 1'

What can I do for fixing this problem?
Thanks.

Hi Klo the problem is that the uc6000rp doesn't have the ?Wireless Remote Control? option in the Settings menu of normal menu of tv. (but is possible to activate it)
For rusamsungtvcommunicator work you have to set ?Wireless Remote Control? option to ON.
But you can't on C6000 because this menu is disabled.
This menu is activated after you change the model strings of the tv on service menu from Uc6000 to uc6600
this is possible if you have 3008.3 by this procedure
With the tv on press Mute 119 Enter
enable hotel mode off > ON
switch off the tv
press info menu mute power on the remote (the tv starts on service menu)
go to CONTROL and press enter
go to HOTEL Option and press enter
go to CLONE TV TO USB and press enter (if you'll get one error ignore it)
press Return and go back to first page of the menu
go to OPTION
Change MODEL from UC6000 to UC6600
with this your tv became an ue40c6600 and you get internet@tv, pvr,timeshift,if you want guideplus,and wireless remote controll option.
The problem is that procedure doesn't work on 3009.2
So if you want these option and get rusamsungtvcommunicator work you have to downgrade to 3008.3 change the model strings to uc6600 upgrade to 3009.2 amnd you get all options enabled and rusamsung tvcommunicator works
After the upgrade if the pvr was disabled (impossible because the tv is upgraded as a UC6600 and the pvr option stay enabled) you can activate it by samsung tv communicator.
If you want some info pm me.
UC6000RP is an Uc6600 with option blocked by model strings
The hardware of uc6000rp (T-VALDEUC VERSION) is the same as Uc6600 so if you change the model strings the tv doesn't have problem and the image quality remains the same.
other uc6000 has other fw version and the hardware change e.g. UC6000 with tmsxdeuc or tval6deuc.
In that uc6000 you can't enable the pvr and internet@tv function because they have different cpu and memory.

[tempinbox]

hello tempinbox
I have C6500 and fw 3009.2.
Do you know how i can activate the ?Wireless Remote Control? option. I can"t find this option in MENU.
thanks

You have just to search in normal menu tv with the tv switch on press menu scroll down to "setup menu" enter the setup menu you see "Plug&PLAY" first scroll down the menu and you find "wireless remote control" under "common interface" page 20 of tv manual
If you don't have the "wireless remote control" option you have to change the model strings to UC6600 but this is possible only if you have t-valdeuc 3008.3 fw.
if you have 3009.2 you have to downgrade to 3008.3 change model strings from UC6500 to UC6600 in the SERVICE MENU (--> if you have 3008.3 just follow this procedure ---> http://wiki.samygo.tv/index.php5/How_to ... aldeuc_Tvs )
for downgrade instructions see info in samygo wiki (you have to hack your tv first with hotel mode hack and then see --> http://wiki.samygo.tv/index.php5/How_to ... C_firmware)

[gooseye]

Is your TV connected to the internet and in same subnet as the PC running ruSamsungTvCommunicator?