[Ended] SamyGO Extensions on F series

[juusso]

you have to write your server`s ip and share names manually in smb_userdata, OR direct in the 04_04_samba.init

[epro09]

Thanks editing 04_04_samba.init file solved a problem. 1 more question, is there somethere step by step tutorial how to configure transmission.

[juusso]

this is related topic: viewtopic.php?f=21&t=4151#p31743

SpoilerShow

Usage:

• After installation navigate to :

  Code: Select all

  http://TV_IP:9091

• Default download directory is set to

  Code: Select all

  /dtv/usb/sda1

  
  Means only woks with USB connected. If your USB mount path is other, go to Edit Preferences... (at the bottom of webgui) and change dir.
• Manual edit of config.json is possible, but you have to stop transmission-daemon process first. file to edit: $SYSROOT/usr/share/transmission/config.js
• up/down speed is set to limited 100Kb/s and can be changed/removed at any time over webgui.

for configuration, use web interface or transgui.

References on https://trac.transmissionbt.com/ and forum.

[qizlee]

@juuso

Hi, I have tried this way for 3 times absolutely follow the guidline. I use the "Easiest way" and it says Update Complete. but I still can not connect to my TV by ftp and telnet. Web and other web also can't open.
Have anyone failed before?

TV Model: UA46F6420AJXXR
Firmware: 1104
Smart Hub: 5.1731

[juusso]

I think you forgot:

you have to rename SamyGO_test.zip to SamyGO.zip first

[qizlee]

Thanks, I will try it later and give you feedbacks.

[qizlee]

after installing the updated widget and data from here viewtopic.php?f=63&t=6778#wrap

my tv goes into reboot loop starts up for a fews seconds then reboots. (UA46F7500 running T-FXPDEUC 1102) ftp works but then the tv reboots...

the old widget worked for me

managed to stop it using the STOP_SAMYGO file.

anyway to check what is causing the reboot?

My TV also reboot after a minute startup. telnet works.
How to set TV work normal first?

[juusso]

cat /.version

[qizlee]

Cat /.version

"X12 0137" KERNEL MODULE VERSION : "0113.1126, DTV, X12, release, DCN_BRANCH"

[juusso]

firmware upgrade should help. Modules, shipped with SamyGO are to new for your tv