SamyGO

sectroyer wrote:Okay let's try something different. open normal service menu (info+....). Wait for samygo to load and run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 59

if doesn't work run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 60

zoelechat wrote:I still think it's a matter of timing because if he had the "blinking red text" it means that FACTORY key had been well sent at least once.
It has already been confirmed by RCremap that factory is 59, not 88 (88 is KEY_RETURN)

Deus3X wrote:

sectroyer wrote:Okay let's try something different. open normal service menu (info+....). Wait for samygo to load and run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 59

if doesn't work run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 60

Nothing happened

samyGOrc -p `pidof exeTV` 59 55

sectroyer wrote:

Deus3X wrote:

sectroyer wrote:Okay let's try something different. open normal service menu (info+....). Wait for samygo to load and run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 59

if doesn't work run this:

Code: Select all

samyGOrc -p `pidof exeTV` 88 60

Nothing happened

ahh f*ck it might have been 55... try this:

Code: Select all

samyGOrc -p `pidof exeTV` 59 55

Same test

Deus3X wrote: From Service menu?
The re is the risk that my tv Stuck in factory ad last time?
I was realy scared... No way to exit from factory... Also the power off botton was not working

zoelechat wrote:If ever the "red blinking text" happens just send FACTORY (=59) once again and it will immediately be gone

ahh f*ck it might have been 55... try this:

Code: Select all

samyGOrc -p `pidof exeTV` 59 55

Same test

sectroyer wrote:what made my suspicious of FACTORY (88) in the first place is that he got it working with KEY_SERVICE which in my RCremap is 88...

zoelechat wrote:

sectroyer wrote:what made my suspicious of FACTORY (88) in the first place is that he got it working with KEY_SERVICE which in my RCremap is 88...

The guy already got FACTORY+3SPEED working in RCremap with 59+60, so there's no doubt about that. No need to try random numbers

Deus3X wrote: i just used the ftp connection to edit the RCremap files.
I just edited libRCremap.config adding {"KEY_RED": "KEY_SERVICE"},
{"KEY_GREEN": "KEY_3SPEED"}...
In entered in service menu (info+menu+mute+power), waited some minutes to let RCremap load and then i pressed red followed by the green key.
The screen was withe for 1 second (after factory key) then returned the service menu with advanced option
Thats all