SamyGO

Samsung TV Firmware on the GO
http://forum.samygo.tv/

[ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)

http://forum.samygo.tv/viewtopic.php?t=9622

Page 49 of 157

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 8:29 am
by Stefan244
I switches my sub hub region reinstalled skype switched back than, but it doesn't work.
I included 2 pictures that you can have a look at my problem.

Thanks in advance.

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 5:12 pm
by melsem
Stefan244 wrote:I switches my sub hub region reinstalled skype switched back than, but it doesn't work.
I included 2 pictures that you can have a look at my problem.

Thanks in advance.
Read here.
1. viewtopic.php?f=70&t=8469&start=1080#p80657
2. viewtopic.php?f=70&t=8469&start=1090#p80847

But we must first:
1. Power OFF TV and UNPLUG USB..
2. Turn ON the tv and do a reset. (( service MENU (info->menu->mute->power) The arrow on the remote to the right (item - factory reset) and press OK. ))
After resetting the TV restarts.

3. Then turn off the TV, Enter the service MENU (info->menu->mute->power).
Disable OTN-support!!!!

4. Customize everything from the beginning. And Skype.
5. Then turn off the TV, turn on the USB.
6. Turn on the tv and install SamyGo. ...

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 7:43 pm
by Stefan244
Thanks for your reply.

I have also thought about that, but at post one there was written, that this can brick the tv:

"Also avoid Factory Reset, high brick risk !!! More, it's useless...
Up-to-date reported bricks count due to factory reset: 4"

So you think this shouldn't brick my tv?

Kindly regards
Stefan

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 8:31 pm
by melsem
Stefan244 wrote:Thanks for your reply.

I have also thought about that, but at post one there was written, that this can brick the tv:

"Also avoid Factory Reset, high brick risk !!! More, it's useless...
Up-to-date reported bricks count due to factory reset: 4"

So you think this shouldn't brick my tv?

Kindly regards
Stefan
Hi.
Without USB-flash, No bricks tv. I did 2 factory reset (2130.0). And my TV works.

On the first and second TV after the downgrade had the same problem. Stops working TV after 7-15 seconds and Skype...
FTP NO, telnet - NO, netcat - NO??? What can do???
Here and had to do a factory reset.

Miscellaneous kernel and More.
And it's useless???

Power OFF TV and UNPLUG USB..
And continue to do it as posted in the message above Carefully!!!!.

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 9:08 pm
by zoelechat
melsem wrote:Miscellaneous kernel and More.
And it's useless???
People having bricked their TVs is a FACT, and it always happened just after factory reset.
Actually we don't know exactly what they did wrong nor even if something was done wrong, so better prevent than cure.
That said, it's possible that if "everything" is done correctly like you described it's unlikely to happen, but it already happened. Let's say to about 1% users, and everybody has to be aware.
It's a way for us to tell: do it at your own risks, in last resort, we take no responsibility :)

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 9:32 pm
by melsem
Agree 100%.
Do at your own risk. And nobody is responsible, except the owner of the tv.
Wrote, as did himself. And TV no brick.

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 11:30 pm
by tvtv
zoelechat wrote:
melsem wrote:Miscellaneous kernel and More.
And it's useless???
People having bricked their TVs is a FACT, and it always happened just after factory reset.
Actually we don't know exactly what they did wrong nor even if something was done wrong, so better prevent than cure.
That said, it's possible that if "everything" is done correctly like you described it's unlikely to happen, but it already happened. Let's say to about 1% users, and everybody has to be aware.
It's a way for us to tell: do it at your own risks, in last resort, we take no responsibility :)
to melsem:
When i had a tv stuck on the smart tv loading sreen, i had to open the tv and follow a reset process shorting out two pins to reset the eeprom (long time ago, but it worked for getting the tv back up and running). but lets hope it doesnt come to that :)

Re: [!!!] Rooting H on latest firmwares

Posted: Sat Oct 31, 2015 11:35 pm
by Stefan244
Thanks factory reset worked.

Re: [!!!] Rooting H on latest firmwares

Posted: Sun Nov 01, 2015 10:37 am
by prowi
ue55h6470
firmware 2770
firmware updates are blocked on router
wifi connection
recording device
no menu quickly power off and samsung instant on

insmod_qca.sh:
SpoilerShow
echo " insmod_qca.sh begin"
echo 1 > /dtv/NET_OK
/bin/sh /mtd_rwarea/network/runSamyGO.sh &
insmod /mtd_cmmlib/WIFI_LIB/QCA/cfg80211.ko
insmod /mtd_cmmlib/WIFI_LIB/QCA/ath6kl_usb.ko ath6kl_p2p=0x19 debug_quirks=0x200 reg_domain=0x37
echo " insmod_qca.sh end"
SamyGo_OK.txt:
OK

wifi_vendor.txt:
2

network_type_info.txt:
CurrentType=1

there ist no vermagic.txt. file after run batch.bat

sam.log:
SpoilerShow
+ /bin/sleep 30
+ /dtv/bin/ls
Terminated
+ [ 143 -eq 143 ]
+ echo SFD detected. Insmoding...
SFD detected. Insmoding...
+ /bin/cp /dtv/usb/sdb1/SamyGO/antysfd.ko /tmp/
+ /bin/cp /dtv/usb/sdb1/SamyGO/ntkfree /tmp/
+ /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
+ [ 8 -ne 0 ]
+ /bin/dmesg
+ /bin/grep antysfd
+ /bin/busybox tail -n 1
+ /bin/busybox cut -d ' -f 4
+ good_vermagic=
+ echo good vermagic=''
good vermagic=''
+ echo
+ /bin/dmesg
+ /bin/busybox grep anty
+ chmod +x /tmp/ntkfree
Terminated
+ mknod /dtv/ntkaxis c 140 0
Terminated
+ /tmp/ntkfree
Terminated
+ cp /dtv/usb/sdb1/SamyGO/samyGOso /tmp/
Terminated
+ cp /dtv/usb/sdb1/SamyGO/libNetSwitch.so /tmp/
Terminated
+ chmod +x /tmp/samyGOso
Terminated
+ /tmp/samyGOso -d -A -r -l /tmp/libNetSwitch.so WIRED
/dtv/usb/sdb1/SamyGO/lan.sh: line 5: /tmp/samyGOso: not found
+ echo checking /dtv/usb/sdb1
checking /dtv/usb/sdb1
+ /bin/sleep 1
+ [ -e /dtv/usb/sdb1/STOP_SAMYGO ]
+ cd /tmp
+ mkdir /tmp/bin
Terminated
+ echo OK
+ [ -e /dtv/qcm_samygo ]
+ touch /dtv/qcm_samygo
Terminated
+ cp /dtv/usb/sdb1/SamyGO/samygo_telnetd /dtv/
Terminated
+ chmod +x /dtv/samygo_telnetd
Terminated
+ cp /dtv/usb/sdb1/SamyGO/busybox+ /tmp/bin/
/dtv/samygo_telnetd 33
/dtv/usb/sdb1/SamyGO/run1.sh: line 22: /dtv/samygo_telnetd: not found
Terminated
+ chmod +x /tmp/bin/busybox
Terminated
+ /tmp/bin/busybox --install -s /tmp/bin
/dtv/usb/sdb1/SamyGO/run1.sh: line 27: /tmp/bin/busybox: not found
+ sync
Terminated
+ export PATH=/tmp/bin:/dtv/bin:/usr/sbin:/usr/bin:/bin:/sbin:/etc/Scripts:/util
+ export LD_LIBRARY_PATH=/tmp/bin:/dtv/bin:/lib
+ sync
Terminated
+ sync
+ /tmp/bin/busybox tcpsvd -vE 0.0.0.0 21 /tmp/bin/busybox ftpd -w /
/dtv/usb/sdb1/SamyGO/run1.sh: line 32: /tmp/bin/busybox: not found
Terminated
+ ln -s /dev/loop3 /tmp/loopnone
Terminated
+ sync
Terminated
+ [ -e /dtv/usb/sdb1/SamyGO/newvdfs.img ]
+ /tmp/bin/busybox losetup /tmp/loopnone /dtv/usb/sdb1/SamyGO/samyext4.img
/dtv/usb/sdb1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox mount -t ext4 -o sync,exec /tmp/loopnone /mnt
/dtv/usb/sdb1/SamyGO/run1.sh: line 44: /tmp/bin/busybox: not found
+ /tmp/bin/busybox --install -s /mnt/bin
/dtv/usb/sdb1/SamyGO/run1.sh: line 45: /tmp/bin/busybox: not found
+ sync
Terminated
+ rm /mnt/sam.log
Terminated
/dtv/usb/sdb1/SamyGO/run1.sh: line 48: can't create /mnt/sam.log: Read-only file system
+ ls -la /mnt/*
/dtv/usb/sdb1/SamyGO/run1.sh: line 49: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sdb1/SamyGO/run1.sh: line 50: can't create /mnt/sam.log: Read-only file system
+ echo Starting rcSGO from run1.sh
/dtv/usb/sdb1/SamyGO/run1.sh: line 51: can't create /mnt/sam.log: Read-only file system
+ echo ===========================
/dtv/usb/sdb1/SamyGO/run1.sh: line 52: can't create /mnt/sam.log: Read-only file system
+ /mnt/bin/busybox2 sh -x /mnt/rcSGO /mnt
IMG_20151031_155107.jpg
IMG_20151031_161852.jpg
I thougt i do all steps like the first post, but i forgot at step 9 to reboot the tv and so i do all the steps again, and the result is
no telnet and no ftp :oops: :cry:

Please can you help me what i have to do to complete the root in right way
thank you

Re: [!!!] Rooting H on latest firmwares

Posted: Sun Nov 01, 2015 11:05 am
by sectroyer
I think there is something wrong with your usb. That's why you don't get vermagic.txt :)
All times are UTC+01:00
Page 49 of 157

Powered by phpBB® Forum Software © phpBB Limited