SamyGO

You have to destroy partition table on USB. One of possible ways is to use diskpart (native xp partitioning tool).
http://forums.techarena.in/windows-xp-s ... ost4909717

I found a way to erase partition from an pendrive

1. Open a command window as admin (cmd)
2. type: "diskpart"
3. type: "select disk 3" (where you replace 3 with the nr of your pendrive)
4. type: clean

You'll see in diskmgmt that there isn't any partition on the pendrive anymore
Reply With Quote

Be sure if your USB is recognized as disk3, you may destroy your hard drive instead !

Other options to get your 16Gb back is to use software e.g. FDISK, Partition Magic, QTparted...
You also could repartition your pen using windows Disk Management.

If you preferring a GUI, then do "start > run > diskmgmt" and delete partitions from the USB. When you format through explorer or cmd it formats just the selected partition, XP does not care about multiple partitions on USB flash keys. So you have to remove the xfs partitions by yourself and remove/resize the fat(32).

is there any plan, when chaninfo and other nice features of the samygo extensions will be available in this firmware hack?

juuso wrote:You have to destroy partition table on USB. One of possible ways is to use diskpart (native xp partitioning tool).
http://forums.techarena.in/windows-xp-s ... ost4909717

I found a way to erase partition from an pendrive

1. Open a command window as admin (cmd)
2. type: "diskpart"
3. type: "select disk 3" (where you replace 3 with the nr of your pendrive)
4. type: clean

You'll see in diskmgmt that there isn't any partition on the pendrive anymore
Reply With Quote

Be sure if your USB is recognized as disk3, you may destroy your hard drive instead !

Other options to get your 16Gb back is to use software e.g. FDISK, Partition Magic, QTparted...
You also could repartition your pen using windows Disk Management.

thankx
i done with USB in other way

but:
same problem
I?ve done each step, but red light flashing and tv restarts when I select clone usb to tv on 2nd usb.

my frist Q:
A) in adding the 2 usb ( 2_D6_hh_v2.4.img) do u want mi to delete all file that already on usb (1_D6_hh_v2.4.img)?
B) or first delete 1_D6_hh_v2.4.img that already in usb, than add ( 2_D6_hh_v2.4.img)
C) or second patch should include both 2_D6_hh_v2.4.img and 1_D6_hh_v2.4.img)

THANKX

I HAVE PROBLEM WITH 3D i dont know iF it happen to tv after samygo installation or not.
46-5760 LCD
Modell: UE46D6570WSXXH

my 3d screen is shown in half , top half black, and the down half 3D picture ( the star in black site is flash of camera is not tv problem)
but i think i change some sitting in service menu too, accedentely

picture of tv when playing 3D http://freepicupload.com/view.php?filen ... 121604.jpg
http://freepicupload.com/view.php?filen ... 121604.jpg
i change some sitting in service menu too, accidentally
i dont now if i done with samygo correctly but i have virtual usb.
and samygo and channel list icon on hub.

Its not samygo related. You was not accurate in service menu and seems you dedinitelly changed some value. Bad.
viewtopic.php?p=25931#p25931
viewtopic.php?p=27022#p27022
viewtopic.php?p=27695#p27695

juuso wrote:Its not samygo related. You was not accurate in service menu and seems you dedinitelly changed some value. Bad.
viewtopic.php?p=25931#p25931
viewtopic.php?p=27022#p27022
viewtopic.php?p=27695#p27695

ok thank u for u replay

46-6570 LCD
Modell: UE46D6570WSXXH
version 03
picture: http://freepicupload.com/images/979p.jpg
i need help :
Modell: UE46D6570WSXXH ( UE46D65XXWSXXS)
service menu:
Type.......
Local Set..........
Model.........
Tuner........

Check the sticker at the back tv panel.

do u mean i shuld remove the back cover?
http://ww2.justanswer.com/uploads/europ ... ed_tip.pdf

the sticker i have on tv i post it for u.

juuso wrote:Check the sticker at the back tv panel.

thankx bro for ur repaly
ijust solve the problem
i adhust the tv type to: 46A1UF7E, THAN FACTORY RESTORE.
and 3D problem solved.
but i lost samygo.