PVR to network storage

Here for general support for D series TVs, request and problem solve area.
Post Reply

Deus3X
SamyGO Project Donor
Posts: 168
Joined: Wed Feb 19, 2014 10:29 am

Re: PVR to network storage

Post by Deus3X »

sectroyer wrote:
Deus3X wrote:so...
now the samba share is correctly mounted for recording...
But there is a problem...
The tv asked me to do a test... and the samba share haven't passed the test... write speed 0 reading speed 0
The samba directory mounted has reading and writing authorization, and i'm using a gigabyte lan...
Check with ftp client there is

Code: Select all

.PVRPfmChkLog
on your USB. Just copy it to your samba share and it will stop asking ;)
i can't find it :/
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: PVR to network storage

Post by sectroyer »

Deus3X wrote:
sectroyer wrote:
Deus3X wrote:so...
now the samba share is correctly mounted for recording...
But there is a problem...
The tv asked me to do a test... and the samba share haven't passed the test... write speed 0 reading speed 0
The samba directory mounted has reading and writing authorization, and i'm using a gigabyte lan...
Check with ftp client there is

Code: Select all

.PVRPfmChkLog
on your USB. Just copy it to your samba share and it will stop asking ;)
i can't find it :/
Because you mount bind'ed samba share there :) Disable it and you will find it ;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: PVR to network storage

Post by sectroyer »

Code: Select all

ls -l /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog
;)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
zoelechat
SamyGO Moderator
Posts: 8616
Joined: Fri Apr 12, 2013 7:32 pm
Location: France

Re: PVR to network storage

Post by zoelechat »

I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV
I do NOT receive any PM. Please use forum.
Top
Deus3X
SamyGO Project Donor
Posts: 168
Joined: Wed Feb 19, 2014 10:29 am

Re: PVR to network storage

Post by Deus3X »

zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV
i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: PVR to network storage

Post by sectroyer »

Deus3X wrote:
zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV
i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...
Yes because you DID have some recordings there :) Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
Deus3X
SamyGO Project Donor
Posts: 168
Joined: Wed Feb 19, 2014 10:29 am

Re: PVR to network storage

Post by Deus3X »

sectroyer wrote:
Deus3X wrote:
zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV
i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...
Yes because you DID have some recordings there :) Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory :)
I'm learning lots of thing :)
I will try it :)
Thanks you boot for all, you and zoelechat Are my hero :)
Top
Deus3X
SamyGO Project Donor
Posts: 168
Joined: Wed Feb 19, 2014 10:29 am

Re: PVR to network storage

Post by Deus3X »

sectroyer wrote:
Deus3X wrote:
zoelechat wrote:I think FileZilla doesn't see hidden files by default.
Anyway just copy it after having disabled mount bind and rebooted TV

Code: Select all

cp /dtv/usb/sda1/CONTENTS/.PVRPfmChkLog /dtv/usb/sdb/smb/192.168.2.33/REG_TV
i copied the file from usb to samba dir..
Now the tv does not require the test.. but when i press rec it does not start... ask me to repair the device...
Yes because you DID have some recordings there :) Best is to remove ALL recordings and then before mounting copy ALL files from CONTENTS directory :)
you are hating me :P (hope no :P)
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand :P ?
Top
sectroyer
Official SamyGO Developer
Posts: 6305
Joined: Wed May 04, 2011 5:10 pm

Re: PVR to network storage

Post by sectroyer »

Deus3X wrote: you are hating me :P (hope no :P)
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand :P ?
Ehhh pointless it looks. Now you will have to try is to create a xfs image (for instance 1TB) and mount it over samba this HAS TO WORK :)
I do NOT support "latest fw" at ALL. If you have one you should block updates on router and wait for it to STOP being "latest":)
If you want me to help you please paste FULL log(s) to "spoiler"/"code" bbcodes or provide link(s) to pasted file(s) on https://pastebin.com Otherwise "NO HELP"!!!
If you want root DISABLE internet access to your device!!!!
DO NOT EVER INSTALL FIRMWARE UPGRADE !!!!
Top
Deus3X
SamyGO Project Donor
Posts: 168
Joined: Wed Feb 19, 2014 10:29 am

Re: PVR to network storage

Post by Deus3X »

sectroyer wrote:
Deus3X wrote: you are hating me :P (hope no :P)
i tryed:
1) disable samba mount
2) restarted the tv and recorded from tv to usb
3) deleted from the tv browser the recording
4) copied from CONTENTS folder all the file (.PVRPfmChkLog and NewBoard.ss) into my samba share (REG_TV)
5) enabled samba mount for recording
6) restarted the tv
7) waited for samba mout and then tried a recording...

same error, tv asked me to repair the device...

what i made wrong this time?
what have you write that i had no understand :P ?
Ehhh pointless it looks. Now you will have to try is to create a xfs image (for instance 1TB) and mount it over samba this HAS TO WORK :)
:( :( no ideas :( :(
i tried to create a ifs image and mounting it for 2 days :P always with no result.. That was the reason for me to edit vusb init script :P
Top

Post Reply

Return to “[D] Support”