Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Wed Oct 29, 2014 8:48 pm
No.kipk wrote:Is it normal that I need reboot my tv 4 times to get ftp acces with the pvrdecoder software.
SamyGO
Samsung TV Firmware on the GO
http://forum.samygo.tv/
[PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
Page 61 of 113
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Wed Oct 29, 2014 9:42 pm
More likely unstable root than real PVRdecoder issue...
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 7:44 am
Ok thanks for you replys and thx for this nice pvr decoder. I Have tested now few times and its now started in 1 time. But I have another question, Sometimes my decode files tells me that they are decoded but they are not in my output folder.
Log:
Decoding first time no succes
All recordings on USB listed. Waiting for user.
Dropping DRMDecrypt to work-folder.
Retrieving 20140710183414.key from TV.
Retrieving 20140710183414.inf from TV.
Retrieved 16,43 Gb of 16,43 Gb ..
Connecting to ....... Success
Removing incomplete file 20140710183414.srf
Removing not needed keyfile 20140710183414.key
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user.
Decoding 2th time with succes
Operation finished .. Waiting for user..
Dropping DRMDecrypt to work-folder.
Retrieving 20140710183414.key from TV.
Retrieving 20140710183414.inf from TV.
Retrieved 16,43 Gb of 16,43 Gb ..
DRMDecrypt job: 20140710183414.srf ---> 2014.07.10_20h34_R.ts
DRMDecrypt says: 16,43 Gb of 16,43 Gb processed.
Deleting F:\20140710183414.key
Deleting F:\20140710183414.srf
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user.
It looks like the first time Decrypt not doing his job.
Log:
Decoding first time no succes
All recordings on USB listed. Waiting for user.
Dropping DRMDecrypt to work-folder.
Retrieving 20140710183414.key from TV.
Retrieving 20140710183414.inf from TV.
Retrieved 16,43 Gb of 16,43 Gb ..
Connecting to ....... Success
Removing incomplete file 20140710183414.srf
Removing not needed keyfile 20140710183414.key
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user.
Decoding 2th time with succes
Operation finished .. Waiting for user..
Dropping DRMDecrypt to work-folder.
Retrieving 20140710183414.key from TV.
Retrieving 20140710183414.inf from TV.
Retrieved 16,43 Gb of 16,43 Gb ..
DRMDecrypt job: 20140710183414.srf ---> 2014.07.10_20h34_R.ts
DRMDecrypt says: 16,43 Gb of 16,43 Gb processed.
Deleting F:\20140710183414.key
Deleting F:\20140710183414.srf
Removing DRMDecrypt from work-folder..
All recordings on USB listed. Waiting for user.
It looks like the first time Decrypt not doing his job.
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 9:05 am
The PVRDecoder "normally" wouldent fail like this ..
Your network might have problems ..
If you are using WiFi, please try connect the TV by cable, and make some new tests.
Your network might have problems ..
If you are using WiFi, please try connect the TV by cable, and make some new tests.
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 11:04 am
I am using the cable
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 2:58 pm
Then I would go with Zoelechats suggestion ... unstable root installed.
You could try re-installing your firmware ... You of cause saved a copy of it
Install it using USB-stick ...
Then re-install root, and cross your fingers for better luck this time
Then try the PVRDecoder again ...
You could try re-installing your firmware ... You of cause saved a copy of it
Install it using USB-stick ...
Then re-install root, and cross your fingers for better luck this time
Then try the PVRDecoder again ...
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 3:56 pm
Tanks for you reply I gonna test it out
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 4:16 pm
At least for testing, you may try to disable completely your firewall. You can also try offline decoding if you find FTP transfer is too often failing...
If you can't manage to get out of it, it's still possible to use PVRtoTS or NoDRM for realtime decoding on TV level
If you can't manage to get out of it, it's still possible to use PVRtoTS or NoDRM for realtime decoding on TV level
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 4:42 pm
Thanks for you reply zoelechat, How can I use the offline decoding function.
Re: [PC] SamyGO PVRDecoder for E/F series - Version 1.5.3.4
Posted: Thu Oct 30, 2014 5:03 pm
First extract keys online in PVRdecoder (from tools menu->Extract all keys to CONTENTS...), should be already done automatically if you tried online decoding at least once..kipk wrote:Thanks for you reply zoelechat, How can I use the offline decoding function.
Plug drive containing recordings to your PC and find a way to make it readable by Windows, mostly 2 ways:
-use a software such as UFS explorer to read it and copy whole CONTENTS dir locally.
-install ext4 driver for Windows to make it readable directly from explorer
Then go into PVRdecoder->tools->decode offline->select folder->CONTENTS