Re: BD-ES6000 Region Hack
Posted: Fri Jul 05, 2013 7:37 pm
maybe wrong pins? Or perhaps wrong connection settings
115200, 8, 1, None, None
Page 8 of 8
Re: BD-ES6000 Region Hack
Posted: Fri Jul 05, 2013 7:44 pm
I have USB to RS232 Adapter. And I connect Tx to 2 and GND to 5. And my COM port settings are:
115200, 8, 1, None, None
115200, 8, 1, None, None
Re: BD-ES6000 Region Hack
Posted: Fri Jul 05, 2013 7:47 pm
your serial cable should contain ttl signal level converter. I hope you don`t use direct COM port connection???
Re: BD-ES6000 Region Hack
Posted: Fri Jul 05, 2013 7:51 pm
With this cable, I can send firmware to satellite receiver via RS232.
I also try to connect two PC with this adapter. (I use USB port for one and RS232 for another) and they can talk via Putty terminal without problem.
Do you have any guess?
I also try to connect two PC with this adapter. (I use USB port for one and RS232 for another) and they can talk via Putty terminal without problem.
Do you have any guess?
Re: BD-ES6000 Region Hack
Posted: Fri Jul 05, 2013 7:54 pm
I dont discuss about cable, everything is written on SamyGO wiki. Check pls.
Re: BD-ES6000 Region Hack
Posted: Fri Aug 09, 2013 6:00 pm
After I succesfully built a max232 circut I've just reached the debug console with 20089999 code. But I couldn't find the region hack part.
Do you have any idea at that point?
Do you have any idea at that point?
====================================
[ TOP Debug Menu]
------------------------------------
2 : Platform Print Setting
4 : Oss Print Debug level
5 : Sdal Print Setting
6 : Sdal Trace Setting
10 : OSS Debugger
11 : TD Debug
21 : Louvre Print Setting
------------------------------------
30 : Arts Debug
------------------------------------
60 : MediaLink Debug
-----------------------------------
99 : Exit
====================================