Page 76 of 157
Re: [!!!] Rooting H on latest firmwares
Posted: Mon Dec 07, 2015 8:26 pm
by sectroyer
shan2812 wrote:sectroyer wrote:netcat to tv on port 3123 and run:
and then quickly:
Code: Select all
/bin/dmesg | /bin/busybox grep antysfd
Hi,
Here is the output from netcat
Code: Select all
D:\nc>nc 192.168.0.88 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't open '/tmp/antysfd.ko': No such file or directory
VDLinux#> /bin/dmesg | /bin/busybox grep antysfd
VDLinux#> /bin/dmesg | /bin/busybox grep antysfd
How LONG did you wait ?
Re: [!!!] Rooting H on latest firmwares
Posted: Mon Dec 07, 2015 8:46 pm
by shan2812
How long should I wait??, Are you saying I was too slow or too quick? I don't think there was more than 1 second between those 2 commands. I executed them quickly because you said so.
Re: [!!!] Rooting H on latest firmwares
Posted: Mon Dec 07, 2015 11:37 pm
by sectroyer
You don't get it:
WAIT LOOOOONG:
run command 1
wait SHOOOORT
run command 2
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 12:22 am
by notengo13
zoelechat wrote:notengo13 wrote:Software Version: T-MST14DEUC-2781.0
OTN Support - OFF
How could OTN be OFF? It's greyed out on your fw. Hurry to block on router level, next fw is no longer rootable.
Version and Model:
before factory reset without root. few day ago
after factory reset I only disabled OTA Support - OFF,
OTN Support was already OFF
I did factory reset twice and was no change for OTN Support - OFF, but OTA Support changed to General
Before I did a factory reset I block this domain on router
msecnd.net
samsungotn.net
http://www.samsungotn.net
test.samsungotn.net
Follow link, check related topic and apply (very short) procedure, you'll find a clue about "where" at the 5th word
ok I will found out when if i get root.
thanks.
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 12:36 am
by zoelechat
Funny about OTN... Anyway perfect if you blocked on router too
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 8:36 am
by shan2812
sectroyer wrote:You don't get it:
WAIT LOOOOONG:
run command 1
wait SHOOOORT
run command 2
ok, got it
Here is the output:
Code: Select all
D:\nc>nc 192.168.0.88 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/busybox grep antysfd
VDLinux#>
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 9:15 am
by mad_ady
@sectroyer: add sleep x to your commands so that there is nothing left to chance.
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 12:27 pm
by djcool
Where is the SSH password stored? It persist after firmware upgrade /downgrade / factoryreset...
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 1:08 pm
by sectroyer
shan2812 wrote:
ok, got it
Here is the output:
Code: Select all
D:\nc>nc 192.168.0.88 3123
/bin/sh: can't access tty; job control turned off
VDLinux#> /sbin/insmod /tmp/antysfd.ko
insmod: can't insert '/tmp/antysfd.ko': invalid module format
VDLinux#> /bin/dmesg | /bin/busybox grep antysfd
VDLinux#>
Alsmost there... Change second command now try:
mad_ady wrote:@sectroyer: add sleep x to your commands so that there is nothing left to chance.
No need. If you follow you will notice soon. Moreover for most users "sleep x" would BREAK root
Re: [!!!] Rooting H on latest firmwares
Posted: Tue Dec 08, 2015 3:14 pm
by elfiatko
IMG_20151205_010201.jpg
What am I doing wrong ?
Please help
TV: HU6900, T-NT14UDEUC-1050.1
Piotr
