SamyGO

Posted: **Fri Dec 30, 2011 4:06 pm**

From the logs i see, FFB procedure was interrupted, it just started to decrypt exe.img...
Does TV reboot by self? Automatically?

Code: Select all

+date +%H:%M:%S
+echo [00:00:50] exe.img.sec found on /dtv/usb/sda1, start decrypting...
+touch /mtd_swu/exe_decrypt_start
+./SamyGODecrypter T-CHLCIPDEUC /dtv/usb/sda1/T-CHLCIPDEUC/image/exe.img.sec /mtd_swu/exe.img
<here must be other code, but this is the last line???>

I`m asking thise questions to understand what`s wrong to prevent other similar sithuations.

What to do for you? After tv boots, go to CHILDREN and run 5.EmergencyAAF. After screen goes blank and returns back, (if time isn`t enough, wait until TV reboots), go to Menu-Help-Software upgrade and choose alternative firmware. It must be active (version isn`t important, maybe you get 2008).

After reboot TV should start normally.

Posted: **Fri Dec 30, 2011 4:36 pm**

Not by USB. Just choose alternative firmware...
What's going on tv?

Posted: **Fri Dec 30, 2011 4:57 pm**

Restarted or not?

Posted: **Fri Dec 30, 2011 8:07 pm**

You have to make ExLink cable for B series and give the debug output. Check B series wiki.

Posted: **Sun Jan 17, 2016 2:47 am**

Hi, im new here. And also i bricked my le32b650 after using FFB.
I'm poor in Linux, and i hope somebody help me fix my old tv.
What i have to do ? step by step.
I'm instaled some putty software on my pc with serial port. I made some ex-link cable for this.
Now i can get into the console and thats all. What i have to do next?
p.s. sorry for my english .....

Posted: **Sun Jan 17, 2016 7:37 am**

Hi. I need log files you got on USB after FFB procedure. What was the reason of brick? Did you unplug TV from wall during process?

Posted: **Sun Jan 17, 2016 11:06 am**

Im sorry but i dont have this logs, after procedure I formated usb

Reason of brick? i dont know. Everything was ok until tv started reset. Tv turned off, red light blind 10 or 11 times and thats all

now if i unplaged tv from power and pluged again, red light blinking 110 or 11 times. After nothing. When i pressed some button on RC red light blinking. Maybe somebody can help me with puffy session?

SamyGO

Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB

Re: Bricked TV after using FFB